Note: This item has cosmetic damage which may include, but is not limited to scuffs, scratches, stains or chips. The damage affects the aesthetics but not the function of the item. There is light scratching around the shell. The pinlock sleeve has been opened.

Shoei RF-1200 Helmet

The Shoei RF 1200 represents years of development and evolution of the Shoei RF Helmet series, distilled into one of the most advanced sport helmets available. The RF1200 has evolved through both wind tunnel testing and on-track rider feedback into a helmet that is light-weight, quiet and most of all extremely safe.

Slim And Light Weight Design

One of the most important features of a quality helmet is that you hardly know it’s there protecting your head. Shoei has reduced the weight of the RF-1200 by using a slimmer design and building a distinct line into the side of the helmet that also serves as an accent. As a result, the new Shoei RF-1200 is lighter than any other Snell certified helmet in the current Shoei lineup.

Shell Construction

The slim design of the Shoei RF-1200, with its distinct accent cut line, widens the bottom of the helmet to help ease the process of putting the RF-1200 on or taking it off. Further advancing the comfort of the AIM+ shell is the industry leading four shell sizes that the Shoei RF-1200 comes in. The impact-absorbing dual liner consists of two layers incorporating different densities, helping to effectively balance the potential impact applied to the more rigid shell.

Quietness

Through advancements in the aerodynamic shape, improved interior linings and a new and improved shield system the rider will experience a very quiet and comfortable riding experience. The interior of the RF-1200 has achieved a balance of a comfortably soft fit and a firm, stable hold. The new design of the cheek pads also improves the motion of the neck, thus helping the rider to check traffic behind him/her for example.

Shield System

The CWR-1 Pinlock shield features ribs on top and bottom of the shield to improve rigidity and eliminate bending of the shield caused by wind pressure or the opening and closing of the shield. Independent beading in the top and sides of the Shoei RF-1200 help to keep the seal of the shield tight and eliminate any excess air. In addition to the CWR-1 shield, Shoei has developed a new base plate for the RF-1200. The Quick-Release Self-Adjusting base plate is spring-loaded and pulls the shield back onto the helmet, sealing it tightly against wind and rain. The addition of a new five-stage rotating dial allows for fine tuning of the base place for easy shield adjustments.

Ventilation

A large lower three position vent, three upper air vent intakes and four uniquely positioned upper exhaust outlet vents combine with the Dual Density EPS liner to allow cooling air to travel unrestricted through tunnels created in the EPS liner.

Features:

• Four shell sizes
• Dual density EPS liner
• Superior ventilation
• 3D Max-Dry System II Liner
• E.Q.R.S. (Emergency Quick-Release System) CWR-1 Shield System
• Neatly secure chin strap
• Includes Pinlock pins and lens insert
• Includes breath guard and chin curtain
• Snell M2010 and DOT Certified

Note: Due to manufacturer restrictions, the Shoei RF-1200 and other Shoei products can only be shipped to addresses within the United States