Log In / Register
Cart (0) Checkout
Shoei Neotec Center Pad
Zoom

Please select a Size to check availability, or to add this item to your Shopping Cart or Wish List.

Select Size:

Size Chart
Select qty:
MSRP
$43.40
Your Savings (10%):
$4.34
Your Price
$39.06
Please select a Size to view availability.

View more like this:

Shoei Neotec Helmet Liner

Replacement liner for Shoei Neotec helmets.

All Neotec helmets come stock with 9mm liners, except the 2XL helmets, which come stock with a 5mm liner. 13mm, 9mm and 5mm liners are optional. 

Note: Due to manufacturer restrictions, Shoei products can only be shipped to addresses within the United States

Write a Product Review for a chance to win our monthly $100 giveaways.
Shoei Neotec Center Pad 4.8 5 17 17
Easy Way to Customize Fit While I like the Neotec as a helmet, the size large has always felt slightly too big, but the medium was clearly too small. The 13mm replacement liner provides just enough additional material for a perfect fit (Neotec's come standard with a 9mm liner). Easy installation and a shout out to Revzilla for amazingly fast delivery and a reasonable price. My only regret is that I should have done this sooner. July 29, 2015
Great option to optimize fit I bought the Neotec for riding with a balaclava in the cold, so sized up slightly to a large shell with a 9mm pad. The helmet is so nice that I want to use it in the summer as well, so got the, large shell 13mm pad which makes it fit me like a medium, without the balaclava. April 20, 2015
Great replacement! I needed a replacement lining so I ordered of Revz and a couple of days later - Boom! On my doorstep. Or rather my mates doorstep, I'm in Brunei so I had to wait till he flew back in a few days later lol. This time though, I will have it shipped directly here. February 21, 2015
Make sure your helmet fits I learned a lesson in helmet sizing as the Neotec had pressure points on the forehead and was a bit loose on the top of the head. A comfortable helmet cups your head equally all around and you're unable to lift it easy when grabbing it upwards. The smaller lining solved the support issue but I still had to depress the forehead area to relieve pressure there. The Neotec fits very differently than the Multitec but at least the linings are removable . October 20, 2014
Very Pleased!!!!! Only place that had what I needed! Fast shipping! Thanks for the all the videos telling and showing the products! September 15, 2014
It did what I needed I wanted a better fit for my helmet so I added a larger center pad. Easy to replace and it fit like it should. September 8, 2014
Neotec Center Pad This thinner, optional pad was pricey but saved my new Neotec helmet. I truly believe this is the pad that should be standard. August 25, 2014
I'm torn... I really want to get the Neotec. But here's my dilemma. I am btwn sizes. My head measures exactly 23" or 58cm around. I tried both the medium & large on locally. They both fit. But the medium was slightly tight around the forehead. And the large slightly loose. Not extreme in either case. But I'm not sure which would be easier to fix. I was only able to keep the helmets on in the local MC store for a few minutes cause the owners were being dicks. So I'll definitely order it from Revzilla. Should I Get the medium and swap out the 9mm lining for a 5mm lining? Or get the large and swap out the 9mm lining for a 13mm lining? June 8, 2014
2 3 next>>
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Shoei Neotec Center Pad? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Shoei Neotec Center Pad
Already Asked: 5 Questions, 26 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
Daniel G: The lining in my NeoTec is not in great shape, but the helmet is only three years old. I love the helmet and figured it would be better to replace the lining that it would be to buy a new helmet. Aug 18, 2015
Barry M: Bought this replacement liner a tad bit smaller than original as the old one stretched and the helmet began to flop around on my head. Now this one won't stay "snapped" in across the front and I had to install 3 screws to hold it in. Not real pleased with this SHOEI helmet so far... Jul 5, 2015
Scott B: I like the option to custom fit the helmet beyond just SM-MD-LG Jun 3, 2015
Lee S: Need xl fit up top 2xl fit cheeks have 2 xl neotec trying make fit better Mar 19, 2015
Bryan G: Helped dial in the fit on my Neotec. With slightly thicker center pad and slightly thinner cheek pads, the helmet now fits like it was custom made for my head. Mar 8, 2015
John G: Needed another set of pads when I was washing the others. Oct 29, 2014
Michael D: "I live in Florida and the liner needs to be changed out for cleaning often enough to make having a spare set very handy." Oct 12, 2014
Dan C: To tighten up my helmet a bit Sep 3, 2014
John T: need thinner pads Aug 24, 2014
Mark T: I purchased an XL Neotec because the large seemed tight at the time. After I wore it for a few weeks it seemed loose. Got these pads to tighten it up. Should of ordered a large. Jun 15, 2014
Andrew W: I wear a shoei neotec for work and I need to change the linings May 5, 2014
Paula R: I went from an RF 1100 to the Neotech of the same size. My head hurts! Apr 12, 2014
R A: This helped my Shoei Neotec Medium size helmet fit a little snugger. I also have an older Small Shoei which is just a tad too snug. With this pad the Medium fit just right Nov 15, 2013
Kris S: Allowed me to make my Neotec one size smaller for a better fit. Oct 17, 2013
R L: OE fit was too loose Sep 6, 2013
Kyle S asked: I bought a Large and while it fits my head well, I notice the helmet wants to sit low on my forehead causing me to constantly push up on the chin bar to reposition the helmet higher (it's like it's rotating forward towards my eyebrows). Will a thicker/smaller center pad help the help eliminate this and not squeeze my head? May 26, 2015
Answer this · Send to friends Good question? Yes (0) No (0)
Charles B: Kyle,

Helmet fit is tricky business. The Shoe L Neotec fits me nicely. I purchased an extra liner simply to use as a backup.

If you put on your helmet and it feels good then bend over, inverting your head, and shake your head with the strap unbuckled. See if the helmet seems comfortably stable and not moving around or falling off. If it stays put its probably a good fit. If it's a tiny bit loose get the thicker liner and try it. Rev Zilla has a great return policy.

Also, being a long rider I often buy the foam inserts sold for bicycle helmets and place the foam on various places to super tune the fit of my helmet for those 800 mile days on the interstate at 85-95 mph. I cut the foam to fit and place it between the helmet and the factory pad. In a pinch I've also used a folded handkerchief.

I love the Neotec !!!!

Ride Safe And Live, CB
May 26, 2015
Reply to Charles Good answer? Yes (1) No (0)
Paul P: I have the same problem with the Neotec and I've read that some others do too. My XL was a slightly loose with the standard pad and I also kept pushing up on the chin bar to make it sit higher from my brow. I purchased the thickest pad and the helmet & now fits perfect and does not slide down as much, however it still wants to position itself lower on the brow than what I like. Not as much of a problem now when I ride my more upright riding position bike (R1200RT), but when I ride my sport bike with a tuck position, the helmet still sits too low on the brow. May 26, 2015
Reply to Paul Good answer? Yes (0) No (0)
Joe A: Yes, a thicker center pad will help. After using the OEM pad for months myself, it's gotten slightly loose and a new pad can make it feel like a new helmet

As far as squeezing your head goes, it's more snug from your forehead over your head to the back of your crown.

Test how tight the snaps secure the new pad when you get it; I'm having an issue with the XL pad I received and will be sending my whole kit to Shoei for a complimentary inspection
May 26, 2015
Reply to Joe Good answer? Yes (0) No (0)
David D: Hi, a smaller pad would help but you might get you head squeezed a little. I bought a large one and my helmet does sit a tad lower, not so much that it's a bother. It lets me use my helmet all day without having any tight spots on my head. May 26, 2015
Reply to David Good answer? Yes (0) No (0)
A S asked: Are the side "curtains" of the 5mm liner any thinner than the stock 9mm liner? Where is the 4mm thickness difference on the liner - back, top, all around? May 5, 2015
Answer this · Send to friends Good question? Yes (0) No (0)
James S: The way I understand it the 5mm is half as thick as the 9mm. Not sure about 4mm. If you install a 5 mm after wearing a 9mm you will notice a big difference in feel. 9 mm is equivalent to a XL and 5mm is a XXL. Hope this helps May 5, 2015
Reply to James Good answer? Yes (1) No (0)
Robert G: All around May 6, 2015
Reply to Robert Good answer? Yes (1) No (0)
Gregory L: I bought this. My understanding is that it's 4mm less all around. I must just say that I bought the smaller cheek pads and that actually resolved my fit issues. I will keep the extra liner for a backup but I actually didn't need it. Buy the smaller cheek pads first and see if that sorts things for you. Also remember your helmet should be tight and will wear in. Your head should not move in the helmet with a fairly firm side to side pull on the chin bar. I had a fall where a helmet that did not fit me correctly (too loose) came off. Lucky I came out of it ok. Be safe & Ride Free ! May 9, 2015
Reply to Gregory Good answer? Yes (0) No (0)
Tim P: Yes the side curtains are thinner on the 5mm liner compared to the 9mm liner.
I would say the foam is thinner all the way around.

I ended up putting the thinner ear pads in and keeping the 9mm stock liner in.
Fits awesome.
May 5, 2015
Reply to Tim Good answer? Yes (0) No (0)
A S: Wait. ear pads are the same thickness... there are no sizes for those. Do you mean cheek pads? May 8, 2015
Tim P: Yes I do, I ment cheek pads... May 8, 2015
A shopper asked: Does the thickness of the centre pad reflect on the sides at all, or the top only? I have an L with, I'm assuming the standard, 9mm liner, that occasionally causes pain from pressure on my right temple. Will getting the 5mm centre liner help with the thickness of the side liner (not the cheek pads, the side curtains of the center liner), or is side liner the same thickness on 5mm, 9mm and 13mm liner? May 5, 2015
Answer this · Send to friends Good question? Yes (0) No (0)
Mark T: I had a 13mm spare that I just took out of the package. I measured all around top, front, and sides. It measured 13mm all around. The lower back was thicker near the base of the helmet. I would assume the other sizes would measure equally also.
Hope this helps
Mark T in VT
May 5, 2015
Reply to Mark Good answer? Yes (0) No (0)
judd s: yes, in my case it helped-it is thinner all around. May 5, 2015
Reply to judd Good answer? Yes (0) No (0)
A shopper asked: What is the difference between the Med 9mm and Med 13mm liner? Do you get more room with one or the other? Nov 18, 2012
Answer this · Send to friends Good question? Yes (0) No (0)
RevZilla: The bigger number the thicker the pad. You will have more room with the 9mm pad (4mm to be exact). Nov 20, 2012
Reply to RevZilla Good answer? Yes (0) No (0)
Product Style RevZilla Item # Manufacturer Product # Availability
XS 5MM 903071 0217-4405-03 In Stock: Ships within 24 hours
XS 9MM 818090 0217-4205-03 In Stock: Ships within 24 hours
XS 13MM 818095 0217-4305-03 In Stock: Ships within 24 hours
SM 5MM 903072 0217-4405-04 In Stock: Ships within 24 hours
SM 9MM 818091 0217-4205-04 In Stock: Ships within 24 hours
SM 13MM 818096 0217-4305-04 In Stock: Ships within 24 hours
MD 5MM 903073 0217-4405-05 In Stock: Ships within 24 hours
MD 9MM 818092 0217-4205-05 In Stock: Ships within 24 hours
MD 13MM 818097 0217-4305-05 In Stock: Ships within 24 hours
LG 5MM 903074 0217-4405-06 In Stock: Ships within 24 hours
LG 9MM 818093 0217-4205-06 In Stock: Ships within 24 hours
LG 13MM 818098 0217-4305-06 Out of Stock
XL-2XL 5MM 903075 0217-4405-07 In Stock: Ships within 24 hours
XL-2XL 9MM 818094 0217-4205-07 In Stock: Ships within 24 hours
XL-2XL 13MM 818099 0217-4305-07 In Stock: Ships within 24 hours