Log In / Register
Cart (0) Checkout
Rox Elite Pivot Risers for 7/8" or 1 1/8" Handlebars
  • Black
  • Black
  • Aluminum
  • Aluminum

Please select a Color and Size to check availability, or to add this item to your Shopping Cart or Wish List.

Select Color:


Select Size:

Select qty:
$94.95 - $119.95
Your Savings (10%):
Your Price
Please select a Color and Size to view availability.

Video Review

Rox Elite Pivot Risers for 7/8" or 1 1/8" Handlebars Videos

Rox Elite Pivot Risers for 7/8" or 1 1/8" Handlebars

Available in black anodized or aluminum finish and designed to clamp into 7/8" handlebar clamps. These Risers allow you to use a stock 7/8" diameter handlebar or you can remove the 7/8" reducers and use a 1 1/8" aluminum "fatbar". Reducers lock into risers to insure no slippage between components.


  • Risers are held by original clamps and re-clamp the handlebars 2, 3.5 or 5 inches higher
  • Rox out-board positioning makes the risers incredibly durable
  • Can be pivoted to desire fore and aft location for ideal riding position
  • Made in the USA
View Fitment Notes & Exceptions

Fitment Notes & Exceptions

This is a universal fit part; it may or may not fit without modification.

  • Will only fit 7/8" bar clamps
  • Fits 7/8" stock or 1 1/8" upgraded handlebars
  • Not compatible with water-cooled BMW R1200GS models
  • Always check and confirm that your vehicle has adequate cable and brakeline length before installing any handlebar risers
Write a Product Review for a chance to win our monthly $100 giveaways.
Rox Elite Pivot Risers for 7/8 or 1 1/8 Handlebars 4.8 5 6 6
Some suggested modifications I had the risers installed. The cylindrical attachments on the bottom are only 3/4"--too short. They should be about 1". Also, they should be knurled or otherwise made to have much more friction. I also suggest that there should be a better way to attach them to the bottom clamps. Let me suggest for starters that you key them on the lateral surface so that they cannot ROTATE. Also, put an additional 1/4" of meat (in addition to the 1" I am suggesting) that has about 1/8" more radius, so that the bottom of the risers cannot pop out of their mounts. As it turned out, I decided to tig-weld them to the bottom clamps. The bottom cylinders should look somewhat like carriage bolts but just roughened. Thanks. Jeff Rada January 10, 2015
Great product - I'd buy them again in a heartbeat! I've used several different types of handlebar risers on my bikes over the years and prefer the Rox Pivot Riser over the others hands down! The biggest advantage of the Rox riser is its ability to pivot the bars toward or away the rider. The addition of the Rox risers to my XR650L has definitely improved the overall ergonomics of the bike and made it much more enjoyable to ride! I highly recommend the Rox Pivot Riser - it's a great product and I would buy it again in a heartbeat! November 3, 2014
Great Product for KLR650 I purchased a 2014 KLR650 and wanted to replace the stock 7//8 steel bars with stronger 1 1/8 alloy bars. The KLR has a high bar as standard so the 2" riser helped with the height and in conjunction with the Pro taper EVO "Henry Reed" bend is great, I may even try a slightly higher “KX high” bend. I'm 5'10". Great natural riding position when seated and even better when standing up. And the iceing on the cake, I was able to fit a Scotts steering damper as an underbar mount. What a great trick look, much stronger bars and the stability of a damper for in the sand. Good dampers are hard to source for a KLR and this solution fixed everything. Just fantastic. October 22, 2014
Confort for standing riding Strong reliable construction Easy to instal, onlly few minutes Make standing riding position a pleasure September 15, 2014
quality product highly recommend Installed on a v-strom. Required new cables and brake lines. It is very sturdy and at 3.5in is the max length allowed without longer electrical wires. My back has reaped the soothing rewards of the more upright sitting position. August 11, 2014
full ajustabillity I got these to go with my flex bars on my 07 1200 GS .It is so much better standing up now! I should have got these a long time ago!!! DUH... November 28, 2013
1-6 of 6
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Rox Elite Pivot Risers for 7/8" or 1 1/8" Handlebars? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Rox Elite Pivot Risers for 7/8" or 1 1/8" Handlebars
Already Asked: 4 Questions, 14 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
Garrett G: I'm 6'3 and find myself bending over too much when I stand on my pegs while riding off-road. I chose the 2" version because taller risers require lengthening cables and brake lines. Thanks to Revzilla support for the info. Nov 24, 2014
Jim J: solid looking quality /made in USA Jul 21, 2014
mario a: Good trade mark
Size options
Jun 16, 2014
Kathi V: Selected for my 2013 CB 1100 to give some pullback and make my seating position more comfortable. Jun 13, 2014
Ray N: to bring the handel bars back a little May 20, 2014
Jim H: For my 1984 Yamaha IT 490, bars are to low. May 8, 2014
Lee C: Brand Apr 28, 2014
Daniel M: I am 6'4" and sit very tall on my VStrom. The bars are too far away from me, and this will hopefully cure the neck strainâ?¦ Dec 23, 2013
George C: Want the rise afforded for added comfort while standing, and because these risers allow for the Scott's Stabilizer without additional parts. Also, to slide the forks up 1" to work with 1" drop rear suspension lowering links. I'm near 6' but this bike (03 DRZ 400 E) is just too tall for comfort. With 1" drop, I can nearly flat foot this bike. Dec 3, 2013
andres v: POR LA CALIDAD Sep 21, 2013
A shopper asked: Hello, Renho one F800GS and would like to put a riser, I saw on the website that has various heights, but be in doubt as to the diameter of the parts of the riser, the F800GS the handlebars is 1 1/8, so it would be 1 1 / 8 in the two extremities of the riser.
What size available for my bike F800GS?
Sep 1, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
Donald H: IF the handlebars are 0.785" - 1.125" in diameter, both extremities (ends) of the rox risers will be 0.785" - 1.125" (the male post and female opening) and should work fine.

If the question is what size works on his bike, I can't answer that question.
Sep 25, 2013
Reply to Donald Good answer? Yes (0) No (0)
Monte G: These are built for 1 1/8 in bars...they just have a sleeve to allow them to fit 7/8 in bars as well. They should fit your F800GS. Sep 25, 2013
Reply to Monte Good answer? Yes (0) No (0)
A shopper asked: will the 2 inch fit the 2014 1200RT and will I have to lengthen the cables for them to work properly? thanks Sep 2, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Donald H: I don't know. I installed these on a klr650 and the cables barely fit, i do however love the product. Sep 2, 2014
Reply to Donald Good answer? Yes (0) No (0)
A shopper asked: Does anyone know if the 3 1/2" version of this product would fit a 2012 BMW GS 1200 w/o changing cables? I'm looking to go tall as possible w/ stock cabling.

Jul 7, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Kathi V: I'd check with Roxx and they might know... if not I check with a BMW forum and see if anybody there knows. Jul 8, 2014
Reply to Kathi Good answer? Yes (0) No (0)
Product Style RevZilla Item # Manufacturer Product # Availability
Black / 2" Rise 849613 1R-P2SEK In Stock: Ships next business day
Black / 3 1/2" Rise 849614 1R-P3SEK In Stock: Ships next business day
Black / 5" Rise 849615 1R-P5SEK Available: Expect 1-2 business days processing time prior to shipment
Aluminum / 2" Rise 849619 1R-P2SE In Stock: Ships next business day
Aluminum / 3 1/2" Rise 849620 1R-P3SE In Stock: Ships next business day
Aluminum / 5" Rise 849616 1R-P5SE In Stock: Ships next business day