Log In / Register
Cart (0) Checkout
Roland Sands CE Armor - Shoulder
Zoom
Select qty:
Your Price
$25.00

Related Video

Roland Sands CE Armor - Shoulder Videos

Roland Sands Design CE Armor - Shoulder

Features:

  • Nitrex Evo patented technology gives protection evenly across surface
  • Repeat performance for multiple impacts
  • Lightweight and flexible
  • Grid pattern reduces weight
  • Fits all RSD jackets with armor ready pockets
  • CE rated 1621-1:1997
  • Sold as a pair
  • 5.25" inches wide by 8" inches tall and 0.5" inches thick
Write a Product Review for a chance to win our monthly $100 giveaways.
Roland Sands CE Armor - Shoulder 4.4 5 27 27
Great armor but did not work for me No complaints on the armor. It looks like it would do its job well. But the loose shoulder pockets of my jacket allow the armor to move around, usually with it ending up behind my shoulder. But the armor is great and the design allows easy insertion into the armor pockets. May 18, 2015
Good so far It's my first jacket/armor purchase(roland sands ronin), so I don't really have anything to compare it to. It fits well, is a little adjustable, very flexible and I usually barely notice it unless I'm thinking about it. Haven't had to use it yet (thankfully), but it feels like it would provide reasonable cushioning. It does work well with people playfully punching me to test it out though :) February 16, 2015
much better than hard plastic armor good deal for soft armor made by ForceField! Fits well in all my jackets. More comfortable than hard plastic. Don't even notice it while riding. January 4, 2015
Light, as shoulder armor goes, but an excellent fit I've learned a couple of things about jackets and armor over the years. 1. Every jacket that (comes with back armor) has grossly inadequate back armor, and; 2) Armor is frequently interchangeable and will fit jackets for which it wasn't necessarily designed. Roland Sands jackets do *not* come with any armor. I'm fine with this because I like to make my own armor choices. I've come to believe that SAS-TEC makes the best armor, thus I installed SAS-TEC shoulder armor on my Roland Sands jacket. Although it is more substantial and would almost surely provide more protection, and although I could get it to fit in the jacket pockets, it made the jacket fit terribly and reduced comfort, both of which are strengths of the Roland Sands line. In this case - SAS-TEC out. The Roland Sands jacket looks great only when it fits properly. Thus here is an example in which only the Roland Sands shoulder armor worked well in the shoulders and I recommend it. However, I was able to easily fit SAS-TEC armor of the kind one would find in a high-end Rev'it jacket in the elbows without affecting comfort or fit, while providing more protection than the Roland Sands armor. For the back, I used an Icon D30 back pad salvaged from another jacket. I've become adept at using a box cutter, and it took about five minutes to obtain a nearly perfect fit. (I need to add an important caveat. The icon D30 back armor is only rated at level 1. I am unable to find the rating on the Roland Sands back armor but if it's level 2, I'd go with that.) I recommend absolutely adding armor to any Roland Sands jacket. However, it generally accepts only lighter armor - I assume because the jacket is designed as much to look good, on and off the bike, as to provide protection in a fall. 1. Every jacket that (comes with back armor) has grossly inadequate back armor, and; 2) Armor is frequently interchangeable and will fit jackets for which it wasn't necessarily designed. Roland Sands jackets do *not* come with any armor. I'm fine with this because I like to make my own armor choices. I've come to believe that SAS-TEC makes the best armor, thus I installed SAS-TEC shoulder armor on my Roland Sands jacket. Although it is more substantial and would almost surely provide more protection, and although I could get it to fit in the jacket pockets, it made the jacket fit terribly and reduced comfort, both of which are strengths of the Roland Sands line. In this case - SAS-TEC out. The Roland Sands jacket looks great only when it fits properly. Thus here is an example in which only the Roland Sands shoulder armor worked well in the shoulders and I recommend it. However, I was able to easily fit SAS-TEC armor of the kind one would find in a high-end Rev'it jacket in the elbows without affecting comfort or fit, while providing more protection than the Roland Sands armor. For the back, I used an Icon D30 back pad from another jacket. I've become adept at using a box cutter, and it took about five minutes to obtain a nearly perfect fit. (I need to add an important caveat. The icon D30 back armor is only rated at level 1. I am unable to find the rating on the Roland Sands back armor but if it's level 2, I'd go with that.) I recommend absolutely adding armor to any Roland Sands jacket. However, it generally accepts only lighter armor - I assume because the jacket is designed as much to look good, on and off the bike, as to provide protection in a fall. IMO, the jacket provides a reasonable degree of protection and it looks great. I have no qualms about walking around off the bike in the fully armored jacket. I perhaps should note that while I think the jacket, which is gray, looks great, my wife claims it is ugly. However, her view needs to be put in the context that she doesn't find any of my (now five) motorcycle jackets attractive. Come to think of it, she doesn't think either of my motorcycle IMO, the jacket provides a reasonable degree of protection and it looks great. I have no qualms about walking around off the bike in the fully armored jacket. I perhaps should note that while I think the jacket, which is gray, looks great, my wife claims it is ugly. However, her view needs to be put in the context that she doesn't find any of my (now five) motorcycle jackets attractive. Come to think of it, she doesn't think either of my motorcycles look good either and one is a KTM 990 SMT, one of the most gorgeous bikes on the planet, so her opinion should probably be dismissed. Finally, since my Roland Sands jacket is gray, probably the hardest color to see, I do wear a florescent yellow vest when riding. December 15, 2014
Seems good to me I have all three of these pads in my Roland Sands Vandal jacket(back, shoulders, and elbows). They are easy to install and fit nicely in the pockets. These shoulder pads are really flexible and stay in place nicely. I have not tested these pads in the sense of falling off my bike (knock on wood), but they do provide me with some peace of mind and seem like they would provide some protection. December 15, 2014
Fine protection! In my opinion I wouldn't use but are necessary to protect yourself. November 15, 2014
As advertised I bought these for my RS Ronin jacket. For the price of the jacket, would be nice if the armor inserts were included, but eh. C'est la vie. Wish Revzilla had had the combo available, but I had to buy all 3 inserts separately (elbow, shoulder, and back). Costs a few extra more dollars, so I can see why Revzilla would be interested in this (it is a business, afterall). Anyway, the armor fits perfectly in the pocket it was designed to go in. It is 3 ~.25in absorbant rubber pads attached to each other. It flexes where needed and I have faith it will help protect me when I crash. October 20, 2014
Pad! There is not much much to say about this product, It fit. It has great protective qualities, though i think it shouldh ave COME with the Jacket. July 28, 2014
2 3 4 next>>
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Roland Sands CE Armor - Shoulder? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Roland Sands CE Armor - Shoulder
Already Asked: 4 Questions, 29 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
John H: I routinely upgrade not just the back armor in motorcycle jackets, but the elbow and shoulder armor as well. I was able to fit SAS-TEC shoulder armor into my Roland Sands jacket and while it no doubt provided more protection it badly screwed up the fit. Since Roland Sands is as much, or more, about style as safety, I put SAS-TEC in the elbows, D30 in the back, but only the Forcefield armor designed for the jacket fit properly in the shoulders. Jul 8, 2015
S T: Wanted armor just for safety. Harley is a bit more sluggish in response than most bikes I have been on. May 29, 2015
David Z: from what I read rsd partnered up with forcefield to create protection for their lines and forcefield is one of the best. This should fit all rsd jackets very well its made for it May 7, 2015
Drew M: SAFETY! Apr 28, 2015
Zachory R: Solid Armor but really changes the feel of my jacket so be careful and order appropriately. Apr 13, 2015
Leopoldo G: I will use protection in my Roland Sands jacket, why not to use de Roland Sands Protections? Mar 31, 2015
rob c: safety of course. Mar 19, 2015
William M: needed for the jacket Mar 17, 2015
james m: Fits FUBAR (as opposed to FUBAR fit) Oct 21, 2014
Michael P: Have the jacket need the armor Sep 30, 2014
adam b: for clash jacket Sep 25, 2014
T J: to use in my roland Sands jacket Sep 15, 2014
Aaron I: bought the jacket Aug 25, 2014
A s: Fits perfectly in my RSD Tracker Jacket Jun 28, 2014
roy L: Wanted them for the Rocker jacket. Jun 15, 2014
Robert C: Materials, price May 30, 2014
M A: Safety for my Roland Sands jackets Feb 15, 2014
James S: Protection! Jan 13, 2014
Mel-Jovan S: Comfortable and removable from the jacket! Nov 29, 2013
Yong B: Made for the RS Ronin jacket. Good enough protection for commuting. Oct 7, 2013
leonard s: Protection from idiots hitting me. Oct 1, 2013
Anthony R: Protection with Ronin jacket. Sep 17, 2013
Yong B asked: Which side faces out (faces the leather), and which side faces your shoulder? Nov 18, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
dan p: I have these installed with the tag facing out, like in the picture. But it doesn't really matter because this soft armor is more of a cushion than hard armor which has a hard, abrasion resistant side.
Also I used these pads as an upgraded knee pad for my Dainese Kevlar jeans, the pads that came with the jeans where a very thin sheet of rubber, there pads where exactly the same shape, but thicker of course.
Nov 19, 2013
Reply to dan Good answer? Yes (0) No (0)
Robert B: I'm pretty sure the more porous sides face out and the smooth sides face in. That's how I use em. Nov 18, 2013
Reply to Robert Good answer? Yes (0) No (0)
Austin S: The rigid parts faces out towards the jacket. The soft part wraps around your shoulder. Nov 19, 2013
Reply to Austin Good answer? Yes (0) No (0)
David A T: Smooth side faces your shoulder and the textured side faces the leather. Nov 18, 2013
Reply to David A Good answer? Yes (0) No (0)
julian b: the side visible in the picture faces out (with the roland sands label) Nov 19, 2013
Reply to julian Good answer? Yes (0) No (0)
A shopper asked: I've read elswhere that this is made by Forcefield. How does it compare to their own Forcefield branded armor? It looks a little different -- lighter maybe?

Also, could either the RSD elbow or shoulder pieces substitute for knee armor inserts?
Sep 9, 2012
Answer this · Send to friends Good question? Yes (0) No (0)
RevZilla: That is correct Forcefield does in fact make the Roland Sands armor inserts. You could try substituting them, however that is not their intended design. They will be too small and most likely feel awkward. Sep 10, 2012
Reply to RevZilla Good answer? Yes (0) No (0)
A shopper asked: Curious if this fits into klim traverse jacket and how it compares to the non 3do klim Ce armor from a weight perspective. Sep 7, 2012
Answer this · Send to friends Good question? Yes (0) No (0)
RevZilla: It is possible to use the Roland Sands CE Armor in a Traverse Jacket, however the D30 is recommended. The weight of D30 when compared to the Roland Sands CE Armor is very similar. Sep 10, 2012
Reply to RevZilla Good answer? Yes (0) No (0)
Product Style RevZilla Item # Manufacturer Product # Availability
Roland Sands CE Armor - Shoulder 826750 0807-2300-0050/0800-D9H0-0001 In Stock: Ships next business day