Log In / Register
Cart (0) Checkout
We're sorry but this product is currently out of stock. You can be notified of its arrival by entering your email in the yellow box below.
Out of Stock
R&G Kickstand Foot Yamaha FJR1300 2006-2014
Zoom
  • R&G Kickstand Foot Yamaha FJR1300 2006-2014
  • R&G Kickstand Foot Yamaha FJR1300 2006-2014
Select qty:
Your Price
$58.99

Related Video

R&G Kickstand Foot Yamaha FJR1300 2006-2014 Videos

R&G Kickstand Shoe Yamaha FJR1300

We’re all self conscious about our weight. No matter how many pounds you’re packing, you never had to worry about sinking into the ground. On the other hand, your bike might. With the R&G Kickstand Shoe you can be sure your bike will stand tall on tarmac and loose surfaces.

Each kickstand shoe sandwiches the existing stand foot with an aluminum bottom, is topped with a stainless steel lid for strength and is held together with 3 hex bolts. All parts and hardware are highly corrosion-resistant. 

Features:

  • Enlarges the original’s footprint by up to 100%
  • Spreads out the load of the motorcycle
  • Will not affect ground or swingarm clearance
  • Smooth edges prevent snagging and catching
This Product Fits:
Yamaha
FJR1300 20062013
FJR1300A ABS 20062014
FJR1300AE 20062012
FJR1300ES 2014, 2015
Write a Product Review for a chance to win our monthly $100 giveaways.
RG Kickstand Foot Yamaha FJR1300 2006-2014 3.3 5 4 4
Glad I made the purchase. I've had this product for a couple of weeks so I only have one long ride on it. But, it makes a very noticeable difference in supporting the FJR 1300 which has too small a footprint for the weight of the bike on the foot of the side stand. I always worried about parking on warm asphalt or gravel using the side stand and the heft of this bike makes using the center stand a chore. I didn't have the installation problems others have reported. It fit well and went together easily. I didn't need the little foam spacer that is supplied. I did use thread lock after reading reviews here. So why did I give it four stars instead of five? I think paying so much for two flat pieces of machined aluminum is too high. Yes the visible plate is anodized but that's mostly to show off the manufacturer's logo. And, I'd rather have painted steel. Then I could torque the machine screws down a little more without worrying about stripping and the weight would be negligible. Still I paid the price and I'm glad I have it. It does the job and I highly recommend it. April 6, 2015
Extra work Expensive but well made. Had to make major modifications to use the foot pad on my FJR1300 because of the Remus exhaust, I new this before I bought the product. As others have stated you also need to file the bikes kick stand foot to shape to fit this product on. If you do not like messing with stuff this is not for you. February 27, 2015
Good except the foot did not seat properly with the bike stand The kickstand foot does the intended job of expanding the foot print of the FJR 1300 motorcycle. However, the machining of the foot where the actual kickstand foot fits into the RG did not fit properly. I had to file material from the bike stand on the corners for the foot to properly seat with the bike stand so the attaching screws would seat. After I made the modifications, the fit was good and works as intended. Because the RG foot did not initially fit properly, I do not recommend the product. January 26, 2015
Good quality / aesthetics. Rough installation. Product looks good. Should work for intended purpose of keeping kickstand from sinking through wet dirt or hot asphalt. No interference issues with maintenance stand as indicated online with other brands. Installation should have been straight fwd. First issue is machine fitment around the cast OE kickstand foot. Due to casting irregularities I had to file the perimeter of my kickstand for proper fitment. There was a foam adhesive pad included in the package which had to be trimmed for length / shape but was narrower than the kickstand foot. No washer or mechanism was included to prevent the 3x countersunk allen screws that hold the assembly together from coming loose, I used thread lock. January 5, 2015
1-4 of 4
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the R&G Kickstand Foot Yamaha FJR1300 2006-2014? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

R&G Kickstand Foot Yamaha FJR1300 2006-2014
Already Asked: 1 Question, 1 Answer
Sort by:
RevZilla Store asked: Why did you choose this?
Richard O: bigger footprint for kickstand Mar 6, 2015
Product Style RevZilla Item # Manufacturer Product # Availability
R&G Kickstand Foot Yamaha FJR1300 2006-2014 962374 PKS0023SI Out of Stock