Log In / Register
Cart (0) Checkout
RAM Mounts Universal Finger Grip Cell Phone Holder
  • Black
  • Black
  • Black
  • Black

Please select a to check availability, or to add this item to your Shopping Cart or Wish List.


Select qty:
Your Price
Please select a to view availability.

RAM Mounts Universal Finger Grip Smartphone Cradle

The RAM-HOL-UN4 Universal Finger Grip™ Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with 3 sets of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. The spine plate contains the universal AMPs and 1.5" x 2" hole patterns. Compatiable with any of the avaliable RAM Mounts Cradle Adapters.

This mount is designed to hold the following devices:

  • Cell Phones (check measurements below for dimensions)
  • 2-Way Radios
  • GPS Devices
  • Works with OtterBox (Defender, Commuter, Impact) Cases, Phones with Bumper, Twisted Metal Case and More
  • Perfect rugged solution for the Blackberry, HTC Evo, Droid X, iPhone, and More

Height Dimensions:

  • Minimum with Top and Bottom Plates: 5.25"
  • Maximum with Top and Bottom Plates: 6.0"
  • Top and bottom plates can be removed for larger devices

Spine Plate Dimensions:

  • 3" Width x 3" Height

Using Short Arm Side Clamps:

  • Maximum Depth: 0.75"
  • Minimum Width: 1.25"
  • Maximum Width: 3.0"

Using Medium Arm Side Clamps:

  • Maximum Depth: 1.25"
  • Minimum Width: 1.5"
  • Maximum Width: 3.5"

Using Long Arm Side Clamps:

  • Maximum Depth: 1.6"
  • Minimum Width: 2.25"
  • Maximum Width: 3.5"


  • High Strength Composite

Note: This RAM Mount Holder does not include the Diamond Base and Ball required to attach to the Holder and RAM mounting system.


Write a Product Review for a chance to win our monthly $100 giveaways.
RAM Mounts Universal Finger Grip Cell Phone Holder 4.6 5 18 18
Performed as expected I ride an FJR1300. I mounted this to my after market triple clamp on a 1" ball mount with a 3" arm. Ran the charger from phone to power outlet on bike. After a 2000 mile trip I was very pleased with this products performance. I was able to use my phone for GPS and music with my bluetooth. I was also able to position the phone high enough to see through the wind shield and video record some of my ride. I have an LG phone with a thin rubber case and this holds it very firm! The upper guard is not needed and the lower is not even nessesary in my situation. I was also able to slide phone up to a position that the arms did not interfere with any of the phones side buttons without compermising grip. October 20, 2014
heavily customizable this is the most flexible holder out there. change it to fit what ever. and RAM products have the knack for durability and they are very sturdy. i wd recommend this over the spring action holder that is over there. September 9, 2014
Fits for what I need Bought this so that I could mount a Snow Lizard case onto my bike (the case encloses my iPhone). Holds it down perfect. Now I can use Google maps vs my standard GPS. July 28, 2014
Simple, effective and stable I really like this design, the stable structure and simple assembly. The only issue is that there are no suggestions for mounting this in a vehicle or on a bike/motorcycle. June 23, 2014
this is a great product The Ram holder is a great product, it has a 3 different adjustment levers depending on your phone it can hold any size, strong grips home won't fall out, but you have to buy the Ram mount May 1, 2014
Fell of the first time I used it I bought this so I could mount my phone in order to use its GPS. I decided to take it on a test run once it was all put together and SECURE, or so i thought. It fell of after the first couple miles. Maybe it was the vibration of the road that just rattled the thing apart or I got a bad model or something. All I know is that I followed the directions exactly, made sure everything was tightly screwed, and $50 fell off of my bike. Thank God I didn't have my phone attached. April 19, 2014
Rugged and Reliable I have a Samsung S4 Active in a protective case and was looking for a way to mount it on my handlebars for an upcoming trip. This RAM holder did the trick. I used the medium height side arms mounted in a way to leave the side control buttons uncovered. I wasn't able to install the upper arm since it covered the headphone jack.but my phone still rides securely - a good thing for a thumper with knobby tires! Cheap, secure and functional... that's all I can ask for. For reference, I used the diamond ball bracket to attach it to an existing mounting point. April 1, 2014
RAM Mounts Universal Finger Grip Cell Phone Holder is funcional this phone mount works well for my iphone5, which is inside a case. Need the U-bolt mount kit with it to attach to handlebar. I have it on my 2013 BMW F800GT January 6, 2014
2 3 next>>
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the RAM Mounts Universal Finger Grip Cell Phone Holder? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

RAM Mounts Universal Finger Grip Cell Phone Holder
Already Asked: 6 Questions, 38 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
Thomas V: Will work with my existing mount and it can be used with my cell phone and gps. Jan 4, 2015
Kathy S: Christmas Present for my son Nov 10, 2014
charles b: Universal fit and reviews Jul 25, 2014
Joseph M: Recommended by a salesperson at Adventure Designs. Allows for one-handed insertion and removal Jun 19, 2014
St Louis R: Great performance more than a year later holding Motorola droids and now Samsung GS4. Stable and adjustable in every need on my R1 - power commuting and backroad tire shredding. Jun 18, 2014
patrick g: WILL FIT MY IPHONE Feb 23, 2014
David P: for gps/phone Feb 15, 2014
Jeffrey J: This work good for iphone 5. You need to figure out some way to charge the phone though since any navigation takes a lot of battery power. Oct 22, 2013
A shopper asked: This is probably a stupid question, but it does rotate to landscape orientation right? Aug 12, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
Jason T: Yes. The ball adapter that fits on the back can be put on a couple different ways. Then the ball adapter itself can rotate. But it does not rotate to every position 360 Degrees because of the extension bracket. I have a Samsung s3 and this holder works great. Hope this helps. Aug 12, 2013
Reply to Jason Good answer? Yes (0) No (0)
Marcellis R: No because I was under the impression that the bracket/arm/ holder would come with it and it didn't do I never used it. You'll have to buy separate parts to make that happen otherwise you'll have a freaky looking paper weight. Aug 13, 2013
Reply to Marcellis Good answer? Yes (0) No (0)
Richard W: It will fully rotate with the ball mount hardware you buy separately or you can install it horizontally or vertically with the techmount handlebar mount also sold separately. Hope this helps. Aug 12, 2013
Reply to Richard Good answer? Yes (0) No (0)
Eric A: It can be mounted vertically or horizontally to a fixed mount. If you are attaching it to a RAM ball mount, it can rotate in any direction and still hold the phone securely. Aug 12, 2013
Reply to Eric Good answer? Yes (0) No (0)
Simon N: Yes, this mount will work in both the portrait and landscape orientations...as well as any angle in between those if desired depending on your mounting method. Aug 12, 2013
Reply to Simon Good answer? Yes (0) No (0)
Gavin T: Yes, but you will need to buy a ball joint (which doesn't come with this Finger Grip holder).

The ball joint will allow you to mount it in any angle
Aug 12, 2013
Reply to Gavin Good answer? Yes (0) No (0)
Duffy L: yes, it should rotate at the RAM ball joint clamp. you may have to rotate the clamp a little since there is a slot for the ball support to slide into Aug 12, 2013
Reply to Duffy Good answer? Yes (0) No (0)
James H: Once you have the RAM mount ball attached to the back of this unit you may rotate and tighten it in any orientation you'd like in the holder. Aug 12, 2013
Reply to James Good answer? Yes (0) No (0)
Albert W: yes. it's a ball and socket. note that this is just the holder piece - the ball and socket is another part that you need to buy Aug 12, 2013
Reply to Albert Good answer? Yes (0) No (0)
Bruce S: Yes, it does rotate to landscape. I am using it for my Garmin Nuvi GPS and have it oriented that way. Aug 12, 2013
Reply to Bruce Good answer? Yes (0) No (0)
Alexander H: Yes it does rotate due to the ball attachment on the back. Have used it for both iphone and ezpass. Aug 13, 2013
Reply to Alexander Good answer? Yes (0) No (0)
Rob W: it hards mounts to a base so it can be whichever way you mount it or rotate if the base rotates. Aug 14, 2013
Reply to Rob Good answer? Yes (0) No (0)
Brian C: If you have a ball mount, you can rotate it. if it's solid mounted, you can mount it sideways. Aug 12, 2013
Reply to Brian Good answer? Yes (0) No (0)
David R: Yes, it can be rotated on the ball mount that is attached to the back. Aug 12, 2013
Reply to David Good answer? Yes (0) No (0)
Padej G: Yes - assuming that you have it attached to a regular ball ram mount. Aug 12, 2013
Reply to Padej Good answer? Yes (0) No (0)
Kaleb B: It will swivel to almost any angle you want it at.
I love it.
Aug 12, 2013
Reply to Kaleb Good answer? Yes (0) No (0)
Steven K: Yes, using the ball mount it will rotate to any angle Aug 30, 2013
Reply to Steven Good answer? Yes (0) No (0)
David P: Yes, it rotates 360 degrees and works very well. Aug 12, 2013
Reply to David Good answer? Yes (0) No (0)
Jeffrey J: Yes. No problem with landscape. Aug 18, 2013
Reply to Jeffrey Good answer? Yes (0) No (0)
daniel z: Yes it does rotate Aug 16, 2013
Reply to daniel Good answer? Yes (0) No (0)
Cameron W: Yes
Aug 12, 2013
Reply to Cameron Good answer? Yes (0) No (0)
A shopper asked: Is the RAM mounts ubolt kit with diamond pattern the correct accessory to attach this smartphone cradle to the bar on my K75? Oct 9, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
Simon N: I am using the Diamond Pattern cradle adapter to mount this to my RAM mount. Works like a charm! However, be sure to order the right length arm to ensure you get the range of motion required for your application. Oct 11, 2013
Reply to Simon Good answer? Yes (0) No (0)
Travis H: Yes, the diamond mount setup was what I used on my '09 KLR650E.The mount comes with the diamond mount rubber ball, and a round shaped rubber ball adapter plates. Either works with this. Oct 9, 2013
Reply to Travis Good answer? Yes (0) No (0)
Samuel M: I have the circular mount, but there are enough mounting points on the grip that I would be surprised if it didn't also fit the diamond mount. Oct 9, 2013
Reply to Samuel Good answer? Yes (0) No (0)
Richard D: thanks....with your input I'll order the circular mount Oct 9, 2013
Reply to Richard Good answer? Yes (0) No (0)
A S asked: for this item would you buy RAM-B-231 or RAM-B-149Z to mount? which one is better? and do you need to buy anything else apart from one of those? Nov 8, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Robert L: The RAM-B-231 is only the universal ball mount to the handlebar; you need more than that. The RAM-B-149Z is the handlebar mount and the cradle mount with the double socket arm and is the one to buy with the universal finger grip phone holder. I love mine! Nov 9, 2014
Reply to Robert Good answer? Yes (0) No (0)
Farhan P: You need to get the mount for your bike. And then make sure you have a ball mount. And this clips onto it. Nov 8, 2014
Reply to Farhan Good answer? Yes (0) No (0)
A shopper asked: Does this come complete with mount onto the handlebars? Apr 12, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
RevZilla: The RAM Mounts Universal Finger Grip Cell Phone Holder does not come with any hardware to attach it to anything. It is just an extension to other RAM Mount Kits, such as the U-Bolt Handlebar Kit. Apr 19, 2013
Reply to RevZilla Good answer? Yes (0) No (0)
scubasimon: No it does not. I needed to order the mounts separately. May 29, 2013
Reply to scubasimon Good answer? Yes (0) No (0)
A shopper asked: an iphone 5 is 4.87 in in height and 2.31 in width. Apr 27, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
scubasimon: yes, it worked very well with my iPhone 5 with a LifeProof case. i used the shortest fingers. i could also use my iPhone 4S with a LifeProof case without adjusting the fingers. May 29, 2013
Reply to scubasimon Good answer? Yes (0) No (0)
Product Style RevZilla Item # Manufacturer Product # Availability
Black 869097 RAM-HOL-UN4U In Stock: Ships within 24 hours