Log In / Register
Cart (0) Checkout
New for 2014!
Puig Clip-On Windscreen Visor
Zoom
  • Clear
  • Smoke
  • Puig Clip-On Windscreen Visor
  • Puig Clip-On Windscreen Visor
  • Puig Clip-On Windscreen Visor
  • Puig Clip-On Windscreen Visor

Please select a Color and Size to check availability, or to add this item to your Shopping Cart or Wish List.

Select Color:

Clear
Smoke

Select Size:

Select qty:
MSRP
$128.35
Your Savings (10%):
$12.84
Your Price
$115.51
Please select a Color and Size to view availability.

Puig Clip-On Windscreen Visor

Add additional wind protection to you existing windscreen with the Puig Clip-On Windscreen Visor.

Features:

  • Multi adjustable visor offers peronalized wind protection
  • Cip-on system allows mounting without and any drilling
  • Mounts on shields between 3mm and 5mm thick

Dimensions:

  • SM - 23cm x 9cm with a clamp width of 16cm
  • MD - 25cm x 10cm with a clamp width of 20cm
  • LG - 31.5cm x 10cm with a clamp width of 22cm

Resources:

View Fitment Notes & Exceptions

Fitment Notes & Exceptions

This is a universal fit part; it may or may not fit without modification.

Write a Product Review for a chance to win our monthly $100 giveaways.
Puig Clip-On Windscreen Visor 4.5 5 10 10
Puig Clip On Visor The Puig clip on visor works! I installed it on my 2014 Honda 500x. I wanted some wind but at 5' 11" I sit a bit high in the wind stream. It doesn't divert all the wind but allows you to deflect enough to make the ride much more comfortable. I am well satisfied. November 17, 2014
works great works great on my 2009 f650gs twin with either standard or low seat. 5'6" with 30" inseam having read reviews that the clips may break, I installed them slowly and carefully. You just need to realize that they don't require that much force to install. The visor holds up well even at 85mph highway speed, after a couple days of riding I rechecked the mounting hardware and everything is all good. highly recommend the product as add-on to stock look on the BMW F twin GS September 1, 2014
Does the job partly, but poor build quality. Ordered this as an addition to my f800gs Puig windscreen. It raises the flow of the wind, but not enough. Im just over 6 feet, and normally rides with the AGV Ax-8 EVO. The "cap" of the helmet still catches in the wind. Without the "cap", it does its job! The major issue with this is the platic joints. The left one broke after 2 rides, and what I guess was 4-5 times of careful adjustments. If I would recommend somehting, it would be to buy the largest one. This extention would be a great product for 50 bucks, but for the price of 115, its just not worth it. Snorre, Norway May 22, 2014
Works well. Little expensive. Have a honda nc700x with givi touring windscreen. I am 6' and ride with full face helmet. I had a tremendous amount of wind buffeting. It smacked right into my face shield and knocked my head about if I wasn't keeping my neck stiff. I could find a pocket of quiet just 3-4" beneath where I was, So I purchased this with the hopes it would deflect the wind over my helmet. And it worked like a charm. I'm thrilled with it. The only downside is now it is a warmer ride because the air is so still ! May 18, 2014
Functions well, great price, -1 star for stripped screw Chose this on price over leading competitor for my V-Strom 650. Able to direct airflow up as desired. One of the screws that held the attachment to the visor stripped its plastic seat. I drilled and set with a machine bolt instead of returning. I think I could avoided stripping if I was forewarned. Just be careful and tighten the two screws incrementally instead of seating one first then the other. May 5, 2014
Just what the doctor ordered I mounted this on top of the stock F800GS windscreen (12 model), and this is fantastic. The wind is now right around the top of my helmet in it's top most position. This isn't too big, and tucks away cleanly for those times when I don't want it. If you are on the look out for an aftermarket windscreen, this is probably the easiest adjustable system you can add. April 19, 2014
Beautiful windscreen Regulable, easy to install. Fits good on my tiger 800xc. March 31, 2014
great addition to my puig windscreen Props to revzilla for making this available to US customers. You guys rock. Love it!!! The multi positionable feature is awesome. March 24, 2014
2 next>>
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Puig Clip-On Windscreen Visor? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Puig Clip-On Windscreen Visor
Already Asked: 8 Questions, 26 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
Michael M: It seems to be the only product of its type to satisfy my demanding requirements. Aug 26, 2014
Doug M: I borrowed one and like it. May 20, 2014
Ty R: Have a honda nc700x with givi touring windscreen. I am 6' and ride with full face helmet. I had a tremendous amount of wind buffeting. It smacked right into my face shield and knocked my head about if I wasn't keeping my neck stiff. I could find a pocket of quiet just 3-4" beneath where I was, So I purchased this with the hopes it would deflect the wind over my helmet. And it worked like a charm. I'm thrilled with it. The only downside is now it is a warmer ride because the air is so still ! May 14, 2014
dan s: chose this because of the numerous mounting positions May 11, 2014
Thomas B: I am 6'1" and buffeting from my givi windshield is bothering me and on line reviews lead me to this as a potential solution May 10, 2014
Snorre Kveim : Still some buffeting on the large windscreen. This will hopfully be the last resort. Apr 23, 2014
David H: added to my puig Nc700x windscreen adjustable wind projection yeah buddy quiet calm ride Mar 3, 2014
Cody M: Great screen spoiler. Put this on my 800GS and it pushed the wind turbulence just over my helmet. Im 5'9" and I have the low seat on the GS. Great Product, great build quality. Feb 7, 2014
David P asked: Any idea if this will fit an Aprilia Futura screen? Aug 8, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Ron F: Looking at images of a aprilia futura on-line, I dont see why it would'nt work. It comes pre-assembled and all you have to do is slide the clamps down on your windshield & tighten the fasteners.(fits most normal thickness w/s) It has adjustments for up and down and also for the angle of the visor itself. It works well for me on my ADV bike. It comes in three widths. I have the middle width(250mm). Depending on how wide and strong your windshield is you may even want the widest one. Hope this helps. Aug 10, 2014
Reply to Ron Good answer? Yes (0) No (0)
Gary L: Not a 100% sure but is really versatile. Fits on my k75 with a nation cycle shield and also on my 09 Klr 650 with a Cee bailey shield.
Nice unit.
Gary
Aug 8, 2014
Reply to Gary Good answer? Yes (0) No (0)
Jaime D: The smaller lenght sizes should fit, but the longer which is the most effective it may not fit properly due to the curvature in the windscreen Aug 8, 2014
Reply to Jaime Good answer? Yes (0) No (0)
Ron T: I fitted it to a Honda Deauville and it works great, but I think it would fit just about any bike with a reasonable size screen. Aug 9, 2014
Reply to Ron Good answer? Yes (0) No (0)
Greg T: I do not know I put it on a 2014 KTM 1190 Adventure R but the mounts to pivot so it is fairly adjustable. Aug 8, 2014
Reply to Greg Good answer? Yes (0) No (0)
Paulo V: Yes. The pivots are adaptable.! Aug 8, 2014
Reply to Paulo Good answer? Yes (0) No (0)
A shopper asked: How to adjust that "multi-adjustable-mounting"? Those screws on both sides won't budge! Is there any trick to do that properly?! Sep 5, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
gary r: Mount the unit as the instructions show. This will give it a somewhat firm base,---attached to the main windscreen,---just grasp, with your thumb on the gas tank side, about the middle of the Puig,---and the other four fingers over the top,---, on the outside,--- do a 'twist/flip' toward you, or if you want the Puig out, twist it forward. You are working against a 'detent (sp?) spring, and it will snap into about 3 easy positions with one of the adjustment arms. The other one 3 positions was more difficult, so me being a tall guy, I installed it in the tallest position, and just enjoy the 3 positions mentioned above.'
I learned THOSE ARE SNAPS, NOT ADJUSTMENT LOOSENING SCREWS ON THE SMALL ARMS.

By the way, if you force it too much, one of the 'arms' will come apart, but with magnified reading glasses due to the small parts, I then 'snapped' it back together, BUT BEFORE I put it together, I used silicone GREASE, and coated the 'gear wheels' inside. It moves easier, but a tedious challenge to put back together.
Sep 5, 2014
Reply to gary Good answer? Yes (0) No (0)
Frank S: Those are not screws, they are pivot points The adjustment is made by handling the parts and moving them through the detentes, which can be pretty stiff. Do this BEFORE mounting on the bike. The parts rotate 180 degrees up and down on both pivot. Get them in the position you want, then attach to the bike Sep 5, 2014
Reply to Frank Good answer? Yes (0) No (0)
Jin P: You just push/pull. It's meant to be stiff so it won't shift in the wind at highway speed. They have detents that click into position like your helmet visor. There is no screw. Once you tighten this sucker down firmly, you don't you iv any screw unless you want to remove it. Sep 5, 2014
Reply to Jin Good answer? Yes (0) No (0)
Dean C: if you mean #2 in the installation pdf, you don't need to loosen the screw. Just rotate the peanut to adjust height and angle by hand. Sep 5, 2014
Reply to Dean Good answer? Yes (0) No (0)
A shopper asked: I have a 2013 KLR 650 with a ZG Double Bubble screen - Im looking for a little more wind protection on the hwy. Would this fit? The screen has some curvature, not flat. May 22, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
T O: I just purchased one of these for an FZ6R that has a zero gravity double bubble windshield and there are pivot points at the clip and at the plexi on this product. So it will change its angle to fit the screen. I haven't got a chance to try it on the highway yet but it looks like it will work well. May 22, 2014
Reply to T Good answer? Yes (0) No (0)
Ron F: Looking at a picture of your ZG windshield online, it looks like it should work. I have my puig visor on a tall kawasaki w/shield on my KLR and it is slightly curved also. The puig visor has some adjustability built in to it , so I think you would be fine. May 24, 2014
Reply to Ron Good answer? Yes (0) No (0)
Thomas B: I highly recommend. I have a versys650 and i am 6'1" and struggled with the wind buffeting even with the tall Givi windscreen. I juat completed a 1500 mile highway trip amd pleased to report the buffeting is gone. I would not heaitate to buy or recommend. May 24, 2014
Reply to Thomas Good answer? Yes (0) No (0)
A shopper asked: I have a stock windscreen on my Honda CB500X - 2014. Am looking for something to raise my total (vertical) wind deflection height. Which size would be most effective for this bike and will it make a huge difference at that height of windscreen ? (I am 6'1" tall).

(Other tall windscreens are not currently available, so I am exploring the visor).
Mar 13, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Phil S: I'm a CB500X rider as well. I think it will help, but you might even want to go further.

I replaced the stock CB500X screen with the Puig Touring Screen. It makes a big difference. I'm now about to order this clip-on as well for extra protection for longer trips. Both are available here on Revzilla.
Sep 3, 2014
Reply to Phil Good answer? Yes (0) No (0)
David H: It will certainly help ...by giving extended hieght and optional positioning Mar 14, 2014
Reply to David Good answer? Yes (0) No (0)
Parker V asked: Doing a couple long distance trips this summer and wondering what size to get for a 13 zx6r? Jun 4, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Kent W: Irealy like my Puig Clip-on. I would recomend going with the larger 31 size to acheive max deflection and protection on the long trip. Jun 4, 2014
Reply to Kent Good answer? Yes (0) No (0)
A shopper asked: Will this fit the 2014 BMW R1200GS Adventure stock windshield? Apr 23, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
David H: Yes it is universal Apr 25, 2014
Reply to David Good answer? Yes (0) No (0)
DEMETRIO A T asked: for my f800 gs adventure, what is the perfect size? Mar 31, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Ron F: Demetrio, Using the measurments given for the different size visors, cut out a template of paper and hold up to the top of your windshield to get an idea of the right size for you and your particular bike. Things to consider are 1) looks
2) amount of protection 3) How strong is your w/s as there is more air pressure pushing at the top of the w/s at speed. I chose the middle option for my KLR and am pleased with it. I might have gone with largest, but wasnt sure how it would look and if it might be too much strain on it at speed. Plus we want to keep the adventure style looks too,right? :)
Apr 10, 2014
Reply to Ron Good answer? Yes (0) No (0)
Product Style RevZilla Item # Manufacturer Product # Availability
Clear / SM 945995 6319W In Stock: Usually ships in 1-2 business days
Clear / MD 945996 6320W In Stock: Usually ships in 1-2 business days
Clear / LG 945998 6375W In Stock: Usually ships in 1-2 business days
Smoke / SM 945994 6319H In Stock: Usually ships in 1-2 business days
Smoke / MD 945993 6320H In Stock: Ships within 24 hours
Smoke / LG 945997 6375H In Stock: Usually ships in 1-2 business days