Pit Bull Rear Stand ZRX / Hayabusa / ZX14R / Ninja 1000
Works as advertised
Good solid construction and easy to use. You will need the spools if purchasing for hayabusa, May need spools for other bikes also.
August 31, 2015
It's a stand...
It works as advertised. I needed to lift the back of my bike off the ground and it does that well.
August 12, 2015
Sturdy. Professional Grade
I bought this for my 2014 ZX-14. I went ahead and spent the extra money for what appeared to be a higher quality stand than a lot of others available on the market. I'm glad I did. Even though the ZX-14 is a big, heavy bike, I had no problems lifting it and once it was up it was solid as a rock. The stand appears as if it will be very durable and I expect it to last longer than the bike!
The only negative is that although the description for this particular item says it's designed for the busa and ZX-14 due to their large, low rear fenders, the handle still contacted the fender when I was positioning the stand under the spools. It was not enough that I couldn't get it under there, but if they are going to make a special stand for this bike it seems that the geometry should be such that everything clears. The first "project" I did with the bike up on the stand was to install a rear fender eliminator kit, so it won't ever be a problem for me again. In any case, I'm satisfied.
July 23, 2015
Great for N1K
If you have the stock fender on the rear of the N1K, this is the one you need. It works well at getting around the fender. You will also need the 8mm small spools. Call Revzilla and make sure you get the right ones. They helped me and the guy nailed it. Very helpful. The stands are super strong and these will definitely last a lifetime. Thanks Revzilla team and Pit Bull makes some awesome products. couldn't be more satisfied.
April 6, 2015
PitBull stands are the best!
I got this stand for my ZX-14R and works great! If you have a Busa or ZX-14R get this stand. I have used this stand for my Busa and my ZX-14R. Even if you have an aftermarket fender eliminator kit it's nice to have the extra room and it's made for those bigger bikes. You do need spools with this stand so I picked up some PitBull spools.
April 5, 2015
Dont cheap out if you can afford it get it!
Purchased this for my 2013 Haybusa I didn't want to remove my rear fender on my bike because I use it as my daily driver. I purchased the Pitbull rear stand made specifically for the Hayabusa and ZX 14 with the stock rear fender still attached. I have used it so far for cleaning/lubricating the chain and the cleaning the back wheel and washing the bike. it works very well and is built like a tank. I will be getting the Pitbull hybrid for the front end next so I can change my own tires and replace brakes. I came so close to buying a cheaper bolt together stand but I am glad I didn't.
September 15, 2014
No problems. Works great.
Does exactly what it's suppose to do. Very well made.
May 20, 2014
I have 2 other Pit Bull stands and when I got my 2013 ZX14R I quickly realized my other stand would fit.
I learned that you either needed to have some sort of fender eliminator on the bike to get the clearance, or you need the specific stand for the bike.
Like all PB products, the stand is perfect. As usual, RevZilla had the best price, quick shipping, and always a pleasure to use the site.
April 7, 2014