Log In / Register
Cart (0) Checkout
Pit Bull Hybrid One Armed Rear Stand Ducati
  • One Pin
  • Two Pins

Please select a Type to check availability, or to add this item to your Shopping Cart or Wish List.

Select Type:

Select qty:
Your Price
Please select a Type to view availability.

Related Video

Pit Bull Hybrid One Armed Rear Stand Ducati Videos

Pit Bull Hybrid One Armed Rear Stand Ducati

The Pit Bull Hybrid One Armed Rear Stand features a removable handle which allows you to use the stand with the handle going either forward or toward the rear of the bike. The handle can be installed going either to the front or back on the drive side, but only to the rear on the non-drive side of most motorcycles.

When installed on the drive side, it allows wheel removal; when installed on the non-drive side, it allows easy sprocket removal. It offers great leverage and stability, and the ball bearing head makes it easy to spin the wheel for chain oiling.

Sold complete.  

Please choose either one pin or two pins:

  • One pin for stand use on drive side only. This pin is the Ducati D Pin.
  • Two pins for stand use on both drive and non-drive side. These pins are the Ducati D Pin and the Ducati DR Pin.

Fits: Ducati 998, 996, 916, 848, 748, Monster 796, 848 Streetfighter, HyperMotard, Monster 1100, Monster S4R, Monster S2R, Multistrada 1000, Multistrada 1100, M900E.

View Fitment Notes & Exceptions

Fitment Notes & Exceptions

  • Does not fit Ducati 1098, 1198, 1199, Diavel, Multistrada 1200, Monster 1200 or Streetfighter 1098/1198
Write a Product Review for a chance to win our monthly $100 giveaways.
Pit Bull Hybrid One Armed Rear Stand Ducati 4.9 5 32 32
Great product This is my 3rd Pit Bull stand. I will always buy Pit Bull...the quality of the product is 2nd to none. October 14, 2014
Excellent Quality This stand is a simple design, easy to use, and is of great quality. I was impressed by the finish and sturdiness of it. It makes working on my S4Rs much simpler and safer. Thanks Revzilla! September 5, 2014
Unmatched high quality stand This is a very well built stand for single sided swing-arm Ducatis. Out of the box I was really impressed with the quality of the stand, and the finish seems to handle the bumps and scrapes that it gets in during normal use in the garage. The fitment of the pins in the rear hub on my S2R 800 was dead on. Yes there are cheaper stands, but frankly I'd pay a little more and have something well built like this than some other flimsy stand holding up my bike. August 25, 2014
Sturdy, Easy to Use, Trustworthy Package showed up in two days. Nicely wrapped and stand was completely protected. This is my 5th Pit Bull stand as all of my bikes use of them so I have them everywhere in the garage. August 4, 2014
Great stand! This stand has been useful in taking weight off my rear wheel and it sits outside in the rain with my motorcycle and has not shown an signs of rust. Well designed. July 28, 2014
Great stand, fast shipping to L.A. Ordered the stand on sunday, delivered to Los Angeles on Tuesday! works great! July 15, 2014
Straight forward accessory that works as advertised Bought this to help save space in the garage by parking/storing a 2014 Ducati Monster 796 in a more upright position. The bike is used for daily commuting so it had to be quick to use as well. Didn't want something that took 5 minutes to set up and take down. Since I have a limited amount of space it was important that the stand work well on both sides of the bike with the handle forward. This stand does that. I can insert the stand into the rear axle and lift the bike up with out hitting anything on the bike. Can even move it around on the stands wheels. However it will leave marks on the garage floor and wears on the end of the handle slightly. Over all a great product that has a nice fit and finish that is sturdy and well built. I have no worries lifting the bike up or taking it down off the stand. July 14, 2014
Without a doubt, the best stand for the Ducati M796 I've used others, but, the Pit Bull stand is without equal. Easy up/down and the pins fit the M796 perfectly. Very stable and easy to use. July 7, 2014
2 3 4 next>>
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Pit Bull Hybrid One Armed Rear Stand Ducati? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Pit Bull Hybrid One Armed Rear Stand Ducati
Already Asked: 8 Questions, 34 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
neil c: chain maintenance on a recently purchased multistrada Dec 5, 2014
Christopher J: Great quality stand. Own them before. Nov 5, 2014
Paul P: Pit Bull quality Oct 17, 2014
M W: The dealer charges me extra to change a tire mounted on the bike. I have to either buy the tire at the dealer at a $20.00 to $25.00 premium or I have to have someone follow me to drop off a third party tire. Aug 8, 2014
Aaron M: I have a Pit Bull stand for my other bikes, well made, easy to use and no worries. I bought this one for my single sided swing arm bike. Jul 17, 2014
Jonathan V: Best you can get Jul 3, 2014
J J: Need stand for my 2013 Ducati Hypermotard and Pit Bull stands are quality. Jun 1, 2014
Walter S: looked very beefy in construction...well made. May 27, 2014
Christopher N: Great stand, excellent build quality. Apr 28, 2014
Isaac A: Needed for repairs on my bike. Apr 28, 2014
colin l: Good product, liked the double sided option Apr 23, 2014
David G: Best quality and features of all the single sided swingarm stands I've seen out there. Apr 22, 2014
Roger L: Maintenance Mar 29, 2014
Greggory G: bought a new bike, needed a rear stand to be able to do some work on it. Mar 11, 2014
ronald m: Because i love my Ducati!!! Nov 10, 2013
Wade S: Video review and customer reviews. Oct 26, 2013
John R: Revzilla reviews of the Pitbull, the American made factor and what looks like a well put Together product. Sep 29, 2013
Bill B: Cause it's cool! Sep 3, 2013
A shopper asked: Will this stand work for Ducati Monster 696? Nov 11, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Vincent P: The one armed rear stand is desiged for the S2R, the stand lifts the rear wheel by levering the rear axel using an access hole in its swing arm. The swing arm is single-side and made from aluminum tubing. Not being fully sure, but from images it looks like the 696 does not have a similar swing arm making this stand not suitable for a 696. Nov 13, 2014
Reply to Vincent Good answer? Yes (0) No (0)
Craig H: No, this model is for single-sided swingarm Ducatis. You'll need the standard model Pitbull... You'll also need to install swingarm spools for the stand to hook onto. Just google swingarm spools Ducati Monster and they'll pop up.

These are great stands... I've got them for all of my bikes.

Good luck!
Nov 11, 2014
Reply to Craig Good answer? Yes (0) No (0)
Ahmed S: I highly doubt it. This is for a bike with a single sided swing arm, which the 696 is not. Nov 11, 2014
Reply to Ahmed Good answer? Yes (0) No (0)
Clifford H asked: Will this stand work with 2013 Multistrada? Thanks Sep 30, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
David R: According to PitBull's website if you have:

Multistrada 1200 = part: F0099-200
Multistrada 1000 = part: F0099-100

I believe the part on this page is F0099-100 since it fits the 748 which is what I have.
Sep 30, 2014
Reply to David Good answer? Yes (0) No (0)
Mark F: Will not fit a Multistrada 1200...Pitbull does make a model that will fit,you just have to make sure it has the correct pin. Sep 30, 2014
Reply to Mark Good answer? Yes (0) No (0)
Clifford H: Guess not! Just saw the exceptions note..... darn. Sep 30, 2014
Reply to Clifford Good answer? Yes (0) No (0)
A S asked: 2014 Monster 786 ABS. Do I need both pins $199, or not $169?
Sep 15, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Marco R: Hi and thanks for submitting your question. Whether or not to buy the stand with one or two pins is entirely based on your needs. If you only need the stand to lift your bike to avoid flat-spots, then one pin is enough. However, if you are an experienced do-it-yourselfer where you will need to lift your bike and remove your rear wheel, then you will need the two pins. Each pin has a different diameter, depending on which side you will lift your bike from. As for myself, I have a 2013 monster 796 abs as well and I stuck with the one pin and I am extremely satisfied with the product. You can't go wrong with this stand.
Thanks again for your request and hope that this response will help you in the purchase of the Pit Bull hybride one armed rear stand.
Best regards!!!
Sep 15, 2014
Reply to Marco Good answer? Yes (0) No (0)
Matthew J: When I bought the stand I got it with both pins. You will have to decide if you will want to remove the tire or change the sprocket and chain. If you're not interested in doing these things yourself, then stick with just the one pin. The stand will still allow you easy access for chain cleaning, oil changes, etc. Either way it's a great stand and you won't regret the purchase. Sep 15, 2014
Reply to Matthew Good answer? Yes (0) No (0)
Craig H: Go ahead and pay for both... Having both pins will alow you to lift the bike from both sides... It's nice because it allows you clear access to the drive side if needed - like if you are doing work on the sprockets, chain, etc... It's a must. Also, it gives you more options for storage... If you're tight on room you can lift from the best side for your sutuation. Sep 15, 2014
Reply to Craig Good answer? Yes (0) No (0)
A shopper asked: I have a Streetfighter 848, and I have the Rizoma rear wheel sliders installed on it, which blocks off the rear wheel axle. I suppose I need to take them off to have this product to work? Thanks! Nov 16, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Keith F: Yes, you will need to remove the Rizoma axle slider to use this rear stand. Nov 30, 2014
Reply to Keith Good answer? Yes (0) No (0)
Jonathan H: Correct. The pins on the stand slide into the axle. Nov 30, 2014
Reply to Jonathan Good answer? Yes (0) No (0)
A shopper asked: Hi
I know my bike was not listed as 'compatible' with this stand (Pit Bull Hybrid One Armed Rear Stand Ducati), but perhaps it's because the model is so new.

Will this work with a 2014 Ducati Monster 1200S ???

Thanks in advance,

Jul 16, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Craig H: Paul,

I'd call my Ducati dealer (Ducati of Indianapolis) at 317-337-1098. These guys will know.

Jul 16, 2014
Reply to Craig Good answer? Yes (0) No (0)
Reginald B: This stand should work with all Ducati single side swing arms bikes Aug 26, 2014
Reply to Reginald Good answer? Yes (0) No (1)
A shopper asked: What part or product would I need to have it fit a Streetfighter 1098S? Sep 1, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
Vincent P: I bought this stand for my Ducati Monster S2R 800. It fits well. Looking at your Streetfighter 1098s the axle looks to be the same. I would give my local Ducati dealer a quick call and ask them if the axles on S2R 800 have the same inside dimentions as on your bike. If they do your likely good to go. If not then simply check on the correct pin size. They are a bit of a pain because they are different from right to left side of the bike. Swapping them out takes time when you need to switch sides for repairs. Sep 26, 2013
Reply to Vincent Good answer? Yes (0) No (0)
Matthew J: You need to get both pins when you order the stand. This will allow you to lift the bike from either side. There should be a drop down menu for "both pins", or a separate option for a stand with both pins. Keep in mind that ordering both pins will cost a little extra. I have a 2012 Monster 796 and I ordered this stand with both pins and I'm very glad I made that choice. Enjoy Sep 25, 2013
Reply to Matthew Good answer? Yes (0) No (0)
Daniel L asked: I purchased this stand a while ago for a Ducati Monster S2R 1000 and it fit great. I now have a Ducati StreetFigher 1098 with the larger axel diameter. Will this stand fit the larger 1098 if I purchase the 43MM pin? Or are the two stands so different that I would have to buy the 1098 stand in addition to this stand? Sep 18, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
chad m: You will be fine with the same stand you just need to get the larger 43mm pin. Oct 1, 2014
Reply to chad Good answer? Yes (0) No (0)
Product Style RevZilla Item # Manufacturer Product # Availability
One Pin 889586 F0099-100 Available: Usually ships in 2-3 business days
Two Pins 889588 F0099-110 Available: Usually ships in 2-3 business days