Motion Pro Pivot Suspension Vise

Suspension legs are long and unwieldly. Driving in delicate seals while your fork tubes are protruding from a bucket is no way to live. Give your work space some dignity and professionalism with a proper suspension vise.  

Features:

• Designed to make suspension service simple and quick
• Holds shocks and forks securely while you change oil, re-valve, or change seals
• Pivoting head holds parts in any position, with mechanical stops every 45 degrees
• Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4 point grip system
• Large side holds 39mm to 69mm diameter parts
• Small side holds 14mm to 39mm diameter parts
• Steel Frame is rigid yet has a small footprint, with 4 pre-drilled holes in the base for secure mounting to a bench
• Movable fluid catch pan with mesh insert, and threaded drain bung

Fork servicing:

• Soft Jaw Fork Peg holds fork slider up for removal of dust seal and seal retaining clip
• Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements
• Can be used to assist in removing compression valve assembly (use of stock front axle required)

Shock servicing:

• Holds shock firmly around shock body, shaft or shock reservoir
• Facilitates removal of piston rod and seal head
• Facilitates removal of shock reservoir caps, chamber pistons or bladder
• Holds shock to remove spherical bearings or needle bearings
• Holds shocks for removal of shock spring