Givi Monorack Sidearms 727FZ for Street Triple 675 2007-2010
works as advertised
I ordered this rack for my 2012 Versys, since I owned a Monolock V46 top case for another bike and intend to switch the case between bikes. the rack doesn't look like the one in the pictures, but it functions the same. It was simple to install, maybe 15 minutes, you re-use the plastic handgrips from the oem ones and screw them to the Givi mount. and assemble the three major parts. The finish is good and locknuts were supplied where necessary. It is a good solid mount. The only odd thing, and this is due to the design of the bike, is that it sits much higher than other racks I have used on other bikes. The rack continues the upswept lines at the rear of the Versys which puts it about mid chest on me at 5'9".
May 26, 2014
I don't believe in paying $800 or more for luggage bags or racks. This was the cheapest option out there for my Versys. These racks are well made, sturdy and connect to the subframe. Luckily, I have a friend who is a Machinist and we mounted a nice flat plate of Aluminum to them instead of the Monokey plate etc.....Very happy.
December 2, 2013
If you have a stock motorcycle
Then it will work but if you have an aftermarket passenger grip or slim taillight assembly or exhaust then you would need to go back to stock except for the exhaust. Also the seat lock is not accessible due to the bar being in the way, you would need to modify it unless you have a wrench to lower the bar each time you want to unlock the seat.
Overall it does look and fit real good.
July 10, 2013
This product is easy to install.
It is a good product and easy to install. The dalivery is very quick.
December 22, 2012
Need it for Givi topcase setup.
What can I say, it's designed to fit with the Givi case I bought with it and is easy to install.
Simple functional item.
February 1, 2012
Looks fantastic, ez to install and functional too...
Looks fantasticon my versys, it was so ez to install and functional too. the locking system is amazing and the backrest is OK
January 30, 2012
Perfect fit and finish
If you're wondering if the Givi rack is better than the SW-Motech version, YES IT IS. Not only does the Givi rack look better on the bike, the fit and finish is way better than the SW-Motech rack I used to have on my previous bike. It is rock solid on my bike with zero movement. I trust that it will hold a fully loaded topcase with no vibrations or instability.
The only problem with installation is that you must drill through the plastic fender of your motorcycle. If you have a fender eliminator, it's not a big deal. With the stock fender, it is curved so it's a challenge to line up the holes correctly. I recommend taking the fender off completely and lining up the actual Givi part to drill holes into it. The hole is a little bigger than 1/2". Even if you screw up, the fender is a $20 part from Honda.
Thank you to Revzilla for getting this part available to me on the website so quickly. It came two weeks earlier than promised.
July 26, 2011