Log In / Register
Cart (0) Checkout
Dynojet Power Commander V Fuel and Ignition for Kawasaki Ninja 300 2013-2014
Zoom
  • Dynojet Power Commander V Fuel and Ignition for Kawasaki Ninja 300 2013-2014
Select qty:
MSRP
$399.95
Your Savings (15%):
$60.95
Your Price
$339.00

Video Review

Dynojet Power Commander V Fuel and Ignition for Kawasaki Ninja 300 2013-2014 Videos

Dyno Jet Power Commander V Fuel and Ignition Kawasaki Ninja 300

Features:

  • Ignition timing control
  • Reduced size from PCIII USB - less than half of the size of Power Commander III
  • USB powered from computer, 9 volt adapter is no longer needed for programming
  • "Warm Up" fuel adjustment reads engine temp and allows fuel/timing adustments based on the reading
  • For use on 2009 and up applications
  • 2 position map switching function built in (map switch not included)
  • Gear/Speed input allows for map adjustment based on gear and speed
  • Analog input allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature
  • With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear - for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables
  • Unit has a -100/+250% fuel change range (up from -100/+100%), this allows more adjustment range for 8 injector sportbikes
  • 10 throttle position columns (up from 9 on PCIII USB)
  • Enhanced “accel pump” utility for increased adjustment and sensitivity ranges
  • Made in the USA

Note: Not legal for sale or use on pollution controlled vehicles.

Resources:

This Product Fits:
Kawasaki
Ninja 300 2013, 2014
Ninja 300 ABS 2013, 2014
Write a Product Review for a chance to win our monthly $100 giveaways.
Dynojet Power Commander V Fuel and Ignition for Kawasaki Ninja 300 2013-2014 5 5 3 3
Big performance gains! Installed the Power Commander V on my Ninja 300 in conjunction with a Yoshimura full exhaust system, the difference in acceleration is fa-nominal mid-top end. The only gripe i have is that the wiring harness that came on the PCV was about 9 inches to short...so i had to mount the unit way down in the lower part of my tail end. Overall very happy with the install, the directions were spot on for my bike, and the performance difference is very noticeable. Very pleased! September 2, 2014
revzilla is amazing I haven't installed it yet, so my review of the product itself will have to wait, but I felt the need to give revzilla props for amazing customer service. They quickly answered all my questions, and my package was delivered LESS THAN 24 hours after I placed the order. I heard they had fast shipping, but I've never received a package so quickly even when spending extra $ on more expensive shipping methods. These people must be wizards or something. Product review to come soon! July 1, 2014
AWESOME! Ok, install was a little bit of a pain. Tells you to remove the fuel tank but I just loosened it up and was able to work around it. I have long fingers so it was ok, but if you don't, then remove the tank. When mounting the unit under the rear seat, it tells you to mount it on the bottom, but with the channels for the tools and such, you can't really get a good spot to mount it. Instead I flipped it over and mounted it under the lid that covers the tool channels. Another item to note, is that the crank case connector that is covered by a rubber boot. The boot cannot really be used over the new connections. Installed this with a Yoshi R77 full exhaust and a K & N air filter. Put the map for that specific set up and this thing MOVES!!! Really recommend this for any type of aftermarket exhaust you put on to really bring the 300 out to play April 17, 2014
1-3 of 3
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Dynojet Power Commander V Fuel and Ignition for Kawasaki Ninja 300 2013-2014? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Dynojet Power Commander V Fuel and Ignition for Kawasaki Ninja 300 2013-2014
Already Asked: 3 Questions, 5 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
Andrew L: I bought this for future mods. Sep 2, 2014
halton m: get the most power from modifications Mar 19, 2014
Lance H: To get full potential out of the R-77 Yoshimura exhaust I bought. Feb 19, 2014
John R asked: Is this pcv unit the one that alters fuel AND ignition maps? On the dynojet website, there is a single unit for both fuel and ignition timing, and a fuel-only unit that requires an additional piece of hardware to adjust timing. I just want to be sure this is the fuel+ignition pcv before purchasing it. Secondary question: do all the maps provided by dynojet (for each individual set of mods to intake/exhaust) contain both fuel maps and ignition timing tables? Or are those just fuel maps?

Thanks.
Jun 30, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
John R: I spoke to dynojet and revzilla customer service, and it's the fuel and ignition unit. Jul 1, 2014
Reply to John Good answer? Yes (0) No (0)
A shopper asked: What does this product exactly do? Apr 21, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
A S: Based on the set-up / modifications you have for your bike, Stock or K&N airfilter or stock or aftermarket exhaust, this thing basically works with your EFI to adjust fuel and air mixtures to increase HP, throttle response and increase power bands for different gears / RPM's. The PCV comes with a program or map configured to a stock Ninja 300. If you add on parts ie. Yoshi full exhaust, K&N air filter or stock air filter with slip on exhaust or whatever. Dyno jet has pre-loaded maps to that configuration for download to basically "tune up" your Ninja Apr 22, 2014
Reply to A Good answer? Yes (0) No (0)
Product Style RevZilla Item # Manufacturer Product # Availability
Dynojet Power Commander V Fuel and Ignition for Kawasaki Ninja 300 2013-2014 897342 17-046 In Stock: Ships within 24 hours