Driven Racing D-Axis Bar End Mirror
These suck! Order something else
Despite following the torque specifications listed, the right hand mirror detached less than 1 mile from the house and at 45 mph - HORRENDOUS PERFORMANCE!
DO NOT BUT THESE!!!! RUN AWAY!!!
However, if you are a masochist also understand their own instructions are wrong. Do this instead:
-Remove mirror ball topped bolt
-Insert both the mirror ball topped bolt and the ball topped bolt form bar end mount into the angled post
-Align and squeeze both halves of the mount together
-Apply Lactite to the bolt ends then insert into the stem and tighten, both sides equally (a little at a time)
-Then and only then mount everything on the bike and torque to 5 ft/lbs
August 22, 2016
Great quality mirror.
I started out with one of these mirrors last year to try out and liked it so much I bought a second. The glass is very nice and gives a very clear image. They are small but still adequate enough for good rear visibility. I have one set up to see behind me and the oher to see to my left side for merging on the highway. They look great, and are quality American Made products. I made my own custom bar ends but the bar ends you can buy from Driven are also very nice. I purchased one to use as a template to make my own. I would definitely buy more if I needed them. I had one mirror portion fall off due to me not making sure it was good and tight after a fair amount of adjustment and bumping things moving around in my garage and the customer service at Driven Racing was great to deal with and had me a new mirror shipped in no time for a very fair price. Great product. USA Made!!!
July 19, 2016
Dont buy for your Fz07
The machine work looks great when you first look at it but when i tried to put them together i had to force the ball into the joint. I thought this was high end machine work. guess not. second thing was that the clamp that goes around your bar end didnt fit, no biggy so i ordered the adapter and that was completly useless. i had to shave off the rubber thing that goes inside the bar end over and over till it fit snug and once i finally got them to work i took the bike out and the wind easily knocks them over cause the adapter is only a bolt with a rubber thing around it.. to save me anymore headaches i had a friend that is a machinist make me a larger clamp that fits around my stock bar ends and now they work great. so unless you know a machinist. save yourself the headache and the 300 bucks.
October 10, 2015
had no problems with it yet, took it on a freeway at 90mph didn't even move. Also I like how you can move it to different directions when you need it to adjust.
April 28, 2015
DO NOT waste your money
It looks great, cool mirror if your bike is just sitting in a show room. The mirror constantly got loose, the screws do not fit well, it ended up FALLING OFF WHILE RIDING ON THE HIGHWAY after the fourth time I tried fixing it. Dont waste your money use normal mirrors. Now im out $100 and have no way of contacting whoever makes this product.
February 13, 2015
decent, but expensive
great finish and fitment, but it will cost you... still need more time to see if it will be effective and durable enough to handle my riding needs.
January 5, 2015
07 GSXR 600
I installed this mirror along with the bar ends that go along with it onto my 07 GSXR 600. I didn't have any issues getting the mirror put together or figuring out how to put it on. Its pretty straight forward. The mirror is a lot smaller than my stock mirrors so its taking some getting used to but the mirror itself is high quality so even though it is small you can still see objects from far away. I am worried about how many times I can remove it on and off before screws start to strip or need to be replaced. I plan on removing it each time I go to the track 2-3 times a month.
September 15, 2014
GARBAGE(get the CRG)
This product is GARBAGE, fell OFF on the freeway while I was Riding.
June 17, 2014