Log In / Register
Cart (0) Checkout
Biltwell Kung Fu Grip For Harley
Zoom
  • Black
  • Light Grey
  • Dark Grey
  • Natural
  • Biltwell Kung Fu Grip For Harley

Please select a Color to check availability, or to add this item to your Shopping Cart or Wish List.

Select Color:

Black
Dark Grey
Light Grey
Natural

Size:

Select qty:
Your Price
$17.95
Please select a Color to view availability.

Biltwell Kung Fu Grips For Harley

Injection-molded Kraton synthetic rubber whipped up into dreamy, vintage-style grips. Soft and squishy like your old BMX grips.

View Fitment Notes & Exceptions

Fitment Notes & Exceptions

This is a universal fit part; it may or may not fit without modification.

  • 1" bars are typically the stock size found on Harley-Davidson products
  • Fitment to Harleys will require installation of an aftermarket throttle tube
Write a Product Review for a chance to win our monthly $100 giveaways.
Biltwell Kung Fu Grip For Harley 4.7 5 7 7
KUNG PAO! So far so good, ordered the 7/8 in. grips by mistake, called back, REV had no issue and were very helpful. Made it very easy for me. Ordered the correct ones right on the spot and sent the old ones back same day. As far as the grips, the are very... "grippy." haha One other guy said it before, they are like the old BMX style grips. They have that throwback flare with better effort in their build. Great grip with gloves on, or off. Revzilla... awesome. I will definitely have my customers' check you guy's out here from Hampton Roads Harley Davidson. > A+ service Cheers, Brandon McMullen September 9, 2014
Squishy and not ugly. These are functional, comfortable and attractive grips. If they seem like they'd look good on your bike, you'll be pleased. August 8, 2014
Great grips, color was off. Great grips, but the "Natural" color is truly natural and not orange like it looks in the photos on both RevZilla and Biltwell's site. July 22, 2014
Good, Inexpensive, Comfortable! Grips. Good grips...an endless quest. I like the Kung Fu grip, especially for the cost! They're perfect for my Yamaha Star Bolt and match up pretty well with the gray R-Spec color. Grippy, stand up to the Utah heat very well (don't know about the cold yet). Took some muscle to put on, but that's a good thing. If you're looking for good grips at a great price? How can you loose with these? July 3, 2014
love the look!!! Want a vintage look? Buy these grips. Fit, feels and looks awesome on my sportster. June 30, 2014
Cozy and stylish grips These grips are easy to put on and pretty comfy. I don't wear gloves often and they have a bit of cushion which I like for longer rides. Good rubber - I've been using these for a few months now and haven't noticed any deterioration. June 6, 2014
Excellent This is a great product, i am very happy Thanks Rezvlla April 22, 2014
1-7 of 7
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Biltwell Kung Fu Grip For Harley? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Biltwell Kung Fu Grip For Harley
Already Asked: 3 Questions, 13 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
Thomas F: Girlfriends bikes handlebars are a little too slippery and vibrate a bit. Oct 9, 2014
ian p: Cause they look sweet!! Jul 27, 2014
Klint K: Squishy and grippy, feels great in the hand. Jul 16, 2014
Christopher R asked: Did you have to get an aftermarket throttle tube for this? Jul 18, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Mike C: You will need to use a throttle tube with these grips. The stock one will do but so will any inexpensive aftermarket version that has the correct fitment. Just make sure you get the correct 1" throttle tube for either an older single cable or newer dual cable throttle depending on what your bike currently has on it. Jul 18, 2014
Reply to Mike Good answer? Yes (0) No (0)
Collin T: For the Yamaha Bolt, no. I did cut the factory tube down a bit (length) for my previous grips and would have done the same for these, but that's just so there's not a little gap...aesthetics. Jul 18, 2014
Reply to Collin Good answer? Yes (0) No (0)
A S: You don't have to. They slid right onto my bars and factory Harley throttle tube with some soapy water. There is no need for glue on these. They will stay on the bars very firm Jul 18, 2014
Reply to A Good answer? Yes (0) No (0)
Denton W: Yeah the stock grip was glued on heavily so I just bought an aftermarket one. If you've got the time you can clean off the stock grips though. Jul 18, 2014
Reply to Denton Good answer? Yes (0) No (0)
Joshua L: i got them to go with my whiskey throttle. i think you'll most likely need an aftermarket tube. the throttle side grip is wider. Jul 18, 2014
Reply to Joshua Good answer? Yes (0) No (0)
Mat F: Tested them out on a triumph, so no. Ended up going with a different grip. Jul 18, 2014
Reply to Mat Good answer? Yes (0) No (0)
Armond A: You can or just take apart the stock ones and glue the new ones on. Jul 18, 2014
Reply to Armond Good answer? Yes (0) No (0)
Bobby D asked: Do these grips go over my existing ones? If so, is it simply the "snug fit" that keeps them on? Sep 8, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Nathaniel J: These grips replace your existing grips. The Kung Fu Grips you purchase come with a right and a left grip. The left is intended to slide directly on to the handlebar and the right grip, which is slightly wider, goes on to your throttle tube. The Biltwell Whiskey Throttle [tube] is what I used to ensure proper fit. It's not noted here but on the Biltwell website they recommend using 3M Super 77 adhesive. If you use standard "griplock" or similar the rubber could breakdown and deteriorate. I used the 3M adhesive and it worked well. Just make sure to slide the grip on to the bar or tube quickly after applying the adhesive, as it will dry quickly. There are a ton of videos on YouTube that show step by step of how to remove/install grips. Biltwell's website also has some nice tips and tricks. Overall I do like these grips. The aesthetic is cool, very much like a BMX grip. I've ridden about 2,000 miles on the grips with no problems. If you do a lot of long distance riding you may want to consider something else, but if customization and "bar hopping" is your thing then these are the grips for you. Sep 12, 2014
Reply to Nathaniel Good answer? Yes (0) No (0)
Mike C: Make sure if you have 7/8" bars you are using the 7/8" grips and the same goes for the 1" bars and grips. They should be a close enough fit that they would not be able to go over your existing grips. You then take your existing grips off and the smaller of the two new grips goes on the clutch side and the larger of the two grips goes over the stock throttle sleeve. Clean surfaces and some grip glue should help keep em in place. These grips are very soft and comfortable. Sep 12, 2014
Reply to Mike Good answer? Yes (0) No (0)
Nick F: First of all no. You'll have to cut or remove your old ones haha. Second of all pretty much they'll be fine just slipped on, it's a snug fit. But you can use 3m adhesive spray to make sure Sep 11, 2014
Reply to Nick Good answer? Yes (0) No (0)
Product Style RevZilla Item # Manufacturer Product # Availability
Black / 1" Bars 889948 GRKFU01BK/GR-KFU-01-BK In Stock: Ships next business day
Dark Grey / 1" Bars 933743 GRKFU01GY/GR-KFU-01-GY In Stock: Ships next business day
Light Grey / 1" Bars 933745 GRKFU01IV/GR-KFU-01-IV In Stock: Ships next business day
Natural / 1" Bars 889949 GRKFU01NT/GR-KFU-01-NT In Stock: Ships next business day