Please select a
to check availability, or to add this item to your Shopping Cart or Wish List.
Certain option combinations (sizes, colors, fitments, etc.) are more expensive than others.
In this case the option is more expensive than the base price,
so a price adjustment of has been added to Your Price.
Please select a to view availability.
Drop us your email and we'll let you know when it's in.
Barkbusters Storm Handguards Bar End Mount Kit for 7/8" or 1" Bars
Fits any hollow-tube 7/8" or 1" diameter handlebars using a single-sided attachment point at the bar end.
Maximum wind and rain protection for street and adventure-touring bikes! Storm Bar End Mount Backbone features an aluminum frame that mounts to the end of the handlebar. Ideal for bikes without space on the handlebar or other mounting methods.
Barkbusters Storm Handguards have an aerodynamic design and a larger profile that wraps around the hands to provide maximum protection from the elements but minimal crash protection as there is no aluminum backbone or handlebar end mount.
Barkbusters handguards were first manufactured in 1984 and now have over 28 years of motorcycle industry experience and riding enthusiasm. That history means Barkbusters has what it takes to produce the finest handguards available on the market today. In the unlikely event that you break a part of the handguard, every piece is replaceable.
Barkbusters Storm Handguards Bar End Mount Kit 7/8 or 1 Bars
Bought this because it looked like the biggest one i could get that fit my bike. I am not disappointed, The wind just barely hits the top of my hands, and i think i can fix that with a minor adjustment. These only mount from the bar ends, and i feel it's sturdy enough, in fact you could even adjust them slightly so i'm glad i picked this one. Installation was a breeze.
March 23, 2015
Two Thumbs Up,Well Protected
Well designed,well engineered, high quality parts,easy installation, generous size,sturdy no complaints.
December 8, 2014
Easy Install and immediate results.
I gently set my bike down on a two track and my stock guards proved they were more looks than function. Needless to say I put some scratches on them and wanted something a little more substantial. These fit the bill. Easy price, easy to install and work great for weather protection. My bars couldn't accomodate the two point mount but these fit the bill with the single bar end mount. I'm not looking to repeat my afore mentioned action but if I do I'm confident these will better protect my bar ends and levers.
October 8, 2014
I had been looking a long time for decent hand guards for my airhead R65 and finally found these. Fit, function, and look are great and Revzilla had the best price and shipped promptly. Go for it.
December 23, 2013
Have a functionality, fit, or otherwise product-specific question about the Barkbusters Storm Handguards Bar End Mount Kit 7/8" or 1" Bars? Ask it here!
If you have a customer service or shipping question, please direct it to our Customer Service department.
Jeffrey O: Easy bar end installation keeps the bars on my Ural uncluttered and available for GPS mounting, etc. Looking forward to warding off the blast of cold air on my hands during winter riding here in New England!Nov 23, 2014
Nenad R: Easy to install, and it should serve the main purpose.Oct 31, 2014
Christopher F: Turns out it fits on Royal Enfield Bullet 2013 handlebars with just the screw (and a cable tie in case the screw loosens). The very many included high-quality high-tech fitments, probably comprising more than half the cost, were superfluous. Makes a big difference when riding in cold air. And also in warm air, I do not have to clench fingers on the handle as there is no rushing air to unprise them, so better endurance.Oct 21, 2014
David M: Help protect my fingers from the cold.Jun 8, 2014
Jonathan B: Recommended for my bike - Yamaha FZ 09Apr 9, 2014
Robert K:This is the single point mounting kit, which means they only mount to the bar end, where as the other Barkbusters kit mounts to both the bar end and the handlebars with an additional bracket. This kit comes with everything you need for the single point mount. I have these on my KLR650 and they were a breeze to install. My bar ends are threaded so I just used the longer hardware that the kit came with and called it a day. I have ridden a few times with them so far and they have remained nice and sturdy.Mar 3, 2015
Lance L:I got the hand guards and the mounting adapters (the aluminum collets you see in he photo) to fit my bike. '83 BMW R65. Nothing else needed. Fit perfectly...I recommend. Hope this helps.Mar 2, 2015
Michael D:The kit had everything i needed for both sides including extenders. Obviously you'll need an Allen wrench set if you don't already have one. And a screwdriver. Really easy to install. Mar 2, 2015
Jeff N:The answer depends on the diameter of the handlebar. The best way to get the right kit is to measure the diameter of your Honda NC700X handlebars, and then select the Barkbusters' kit that corresponds to that diameter. Barkbusters' kits specify which size handlebars the kits are compatible with. For example, the item called "Barkbusters Storm Handguards Bar End Mount Kit 7/8" or 1" Bars" comes with hardware to fit 7/8" and 1" diameter bars.Oct 22, 2013
Mark D:I do not have the bike in question but unless you have something on the ends of your bars that cannot be removed and your bars are indeed hollow 7/8ths or 1 in. they should work fine. These are much less of a complication to install than the ones with a full backbone but not as strong.Oct 22, 2013