Log In / Register
0 Checkout
Arlen Ness Front Turn Signal 39mm Fork Relocation Mounts For Harley 1987-2017
Zoom
  • Arlen Ness Front Turn Signal 39mm Fork Relocation Mounts For Harley 1987-2017 - Black
  • Arlen Ness Front Turn Signal 39mm Fork Relocation Mounts For Harley 1987-2017 - Black
  • Arlen Ness Front Turn Signal 39mm Fork Relocation Mounts For Harley 1987-2017 - Chrome
  • Arlen Ness Front Turn Signal 39mm Fork Relocation Mounts For Harley 1987-2017 - Chrome
  • Arlen Ness Front Turn Signal 39mm Fork Relocation Mounts For Harley 1987-2017 - Chrome

Please select a Finish to check availability, or to add this item to your Shopping Cart or Wish List.

Size:

Select Finish:

MSRP
$39.95
Savings (10%):
$4.00
Price
$35.95

Select qty:

Please select a Finish to view availability.
Add to Wish List

Arlen Ness Front Turn Signal Relocation 39mm Fork Mounts For Harley

Relocates turn signals off the handlebars and brings them in close to triple trees. Direct bolt-on to triple tree pinch bolts that mount on upper or lower tree.

Features:

  • Made of billet aluminum
  • Sold in pairs
3.8 / 5
Bang For The Buck
3.7 / 5
Features
5 / 5
Style
5 / 5
Ease Of Install
5 / 5
Fit & Finish
4 / 5
Durability
4 / 5

Fitment Notes & Exceptions

  • Fits 1987-Up Sportster (except 2016 Forty-Eight) 1991-2005 Dyna Glide & 1987-1996 FXR models with OEM 39mm forks only
  • Triple trees must have pinch bolts that face outward at a 90° angle as pictured
  • Additional hardware may be necessary for installation
This Product Fits:
Harley Davidson
Dyna Convertible FXDS 19942000
Dyna Glide Daytona FXDB-D 1992
Dyna Glide Sturgis FXDB-S 1991
Dyna Low Rider FXDL/I 19932005
Dyna Super Glide Custom FXDC/I 2005
Dyna Super Glide FXD/I 19952005
Dyna Super Glide Sport FXDX 19992005
Dyna Super Glide Sport Touring FXDXT 2001, 2002, 2003
Dyna Wide Glide FXDWG/I 19932005
Low Glide/Low Rider FXRS 19871993
Low Rider Chrome FXRC 1987, 1988
Low Rider Sport FXRS-SP 19871993
Sport Glide FXRT 19871992
Sportster Custom XL1200C 19962017
Sportster Custom XL883C 19982009
Sportster Deluxe XLH883DLX 1989, 1990, 1991, 1992
Sportster Forty-Eight XL1200X 20102015
Sportster Hugger XLH883HUG 19882003
Sportster Iron XL883N 20092017
Sportster Low/SuperLow XL883L 20052017
Sportster Low XL1200L 19952011
Sportster Nightster XL1200N 20072012
Sportster Roadster XL1200R 2004, 2005, 2006, 2007, 2008
Sportster Roadster XL883R 20022012
Sportster Seventy-Two XL1200V 2012, 2013, 2014, 2015, 2016
Sportster Sport XL1200S 19962003
Sportster SuperLow XL1200T 2014, 2015, 2016, 2017
Sportster XL883 20042009
Product Style RevZilla Item # Manufacturer Product # Availability
39MM / Chrome 890737 12-737 In Stock: Ships within 24 hours
39MM / Black 890738 12-738 In Stock: Ships within 24 hours

Shipping

Orders $39.99 and over qualify for our fast free shipping offer. Click Here for FREE Shipping Terms and Conditions.

Please see our International Orders page for orders shipping outside the US.

We show real-time availability on this product page when you select the size/color item you want.  Most items will ship the same business day an order is placed,however if an item requires additional processing time a message will be shown indicating such.

See our full Shipping Policy for further details.

Returns

If your order arrives and it is not right, we will we'll fix it, NO NONSENSE, we promise.

Doesn't fit or just not happy with it? You can return any new, unused and unaltered item within 30 business days of delivery receipt of your item. We will issue a full refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Write a Product Review for a chance to win our monthly $100 giveaways.
3.8 / 5.0
12 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
5
1
1
1
Bang For The Buck
3.7 / 5
Features
5.0 / 5
Style
5.0 / 5
Ease Of Install
5.0 / 5
Fit & Finish
4.0 / 5
Durability
4.0 / 5
Bang For The Buck
5 / 5
Good fit after a trip to the hardware store
These took about ten minutes and were east to install. I did have to run to the hardware store and purchase different bolts for the signals. I ended up getting 1" fine thread hex bolts and they were perfect. I was slightly annoyed I had to buy bolts but then again the is a universal fit part and the price was right so what's another $1 in parts! Also be careful when you are tightening down the hex bolt. The mount can move around and leave some fine scratches on the front of your fork.
March 4, 2015
Ride:
2008 Harley Davidson Sportster Nightster XL1200N
Bang For The Buck
1 / 5
Look for other options
The supplied bolts were incorrect thread and the metal is kinda thin, not as robust as I'd like. There is a bit of a gap between the fork and these brackets. It just doesn't look as finished or tight as the rest of the bike. I'm leaving them on until I find a better solution. If I hadn't already mounted them, I would have returned them and kept on looking for a better piece of kit.

Bottomline: This product will work but leave you disappointed.
November 14, 2015
Purchased
11 months ago
Ride:
2013 Triumph Bonneville SE
Bang For The Buck
1 / 5
did not actually fit.
didnt fit my bike. was listed as compatible. This part now lives in my "parts someone else might want" pile. do not buy this.
February 12, 2016
Ride:
2014 Harley Davidson Sportster Iron XL883N
looks good, nice chrome finish
The over all look is good,fitment was straight forward no issues, It got me the sleeker design I was trying for.
July 26, 2016
Bang For The Buck
5 / 5
Looks Good
Quick and easy to install. (about 15 minutes). Looks Good.
May 25, 2015
Bang For The Buck
5 / 5
Clean install and look
This product does a great job of bringing in turn signals to the fork tubes. One thing that makes this stand out to others that I have tried is the distance between holes on the mount. You can get an un-modified Allen wrench in to tighten to the Trip Tree. Well thought out!! Thank you!
September 6, 2016
Bang For The Buck
4 / 5
Great product, looks good but gets you 90% of the way there
I purchased this kit to relocate my front turn signals after they became blocked by my fairing. Fairly easy to install, rewiring the lights took the longest, well aside form having to hunt down new bolts for my lights. This kit worked great and keeps the lights tight to the forks. You will need to go shopping around your local hardware stores for bolts to hold your existing lights to the brackets. They only come with mounting bolts for attachment to the tree, you're on your own for the other needed hardware. All in all good product and looks good on my bike
March 30, 2015
Ride:
2014 Harley Davidson Sportster Iron XL883N
Bang For The Buck
4 / 5
Quick and easy way to relocate your stock turn signals
They are well made, pretty simple to figure out and an cheaper easy way to relocate your stock turn signals onto the forks, the only downfall (im sure this is depending on different models) is that you might have to run to home depot to pick up some different bolts, I know i had to on my bike just because the stock turn signal bolts were to long to fit and kept the relocators from sitting flush against the forks. After that was done though presto! they are snug against the bike and looking good.
April 11, 2014
Ride:
2014 Harley Davidson Sportster 1200 Custom XL1200C
Bang For The Buck
4 / 5
Features
5 / 5
Style
5 / 5
Ease Of Install
5 / 5
Fit & Finish
4 / 5
Durability
4 / 5
Nice cheap fix for dropping the front turn signals
These are a perfect solution for quickly dropping the stock turn signals. I used them on a 1200 sporty. You will need the bolts that connect the turn signal to the mounts since they are not included. It's a 5/16 - 24 bolt about 3/4" long. There are also no instructions so I've included what I found to work on my Nightster:
1. Remove stock turn signals from handlebars.
2. Unscrew the ball stud from the turn signal housing.
3. Use the bolts you purchased and insert it through the mount and attach the washer to the other side before attaching the turn signal.
4. Remove the lower tree bolt and attach mount by inserting the included bolt.
5. I used the blue loc-tite but do not overtighten since the mount is plastic.
September 11, 2016
Bang For The Buck
3 / 5
Does not fit 2013 FXDF Fat Bob
The part seems fine and is a cheaper alternative for the Harley relocation kit. The problem is that it does not fit the 2013 FXDF Fat Bob as the site said it would. The forks are too large for the part. I will be returning it. Please update your site to not that this model is an exception.
August 16, 2016
Ride:
2013 Harley Davidson Dyna Fat Bob FXDF
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Arlen Ness Front Turn Signal 39mm Fork Relocation Mounts For Harley 1987-2017? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 8 questions Browse 8 questions and 28 answers
Why did you choose this?
RevZilla Store
quality product. easy install.
T H on Jul 23, 2016
Most cost effective option
Kwash883 on Apr 21, 2016
quality product. easy install.
T H on Jul 23, 2016
The easiest way to mount the front turn signals lower when adding a fairing.
Eric G on Jul 19, 2016
Most cost effective option
Kwash883 on Apr 21, 2016
To relocate my forward turn signals on my 2008 Harley Nightster XL1200N
Thomas S on Mar 10, 2016
clearance for biltwell zed bars
Christian H on Mar 8, 2016
Relocation of handlebar mounted signals. Signals kept slipping and moving mirrors. This relo kit was inexpensive and worked ridiculously well! Low profile, solid and easy to install.
H B on Dec 18, 2015
Trying to skulliffy my bike.
Christopher L on Nov 10, 2015
Needed to relocate signals to install Memphis Shades fairing. Very easy installation after buying different bolts.
George H on Oct 9, 2015
needed to relocate blinkers seems like a good product
Corey on Aug 6, 2015
simple and effective
jonathan c on May 25, 2015
Ease of installation and price
Stuart G on May 1, 2015
wanted a clean look
Jason85 on Feb 18, 2015
looks neat and clean most relocation mounts could be used for foot rest
Dick J on Jan 5, 2015
Getting Memphis shades faring and needed to relocate turn signals
Dean T on Nov 28, 2014
Looks and comfort!
Jairo C on Aug 11, 2014
Relocate the indicators to the forks. Gets them off the bars and gets rid of the cluttered look.
Bevan G on Aug 2, 2014
The easiest way to mount the front turn signals lower when adding a fairing.
Eric G on Jul 19, 2016
To relocate my forward turn signals on my 2008 Harley Nightster XL1200N
Thomas S on Mar 10, 2016
What size is the bolt needed for Nightster Model turn signals?
Ernesto M on Apr 26, 2015
BEST ANSWER: I honestly don't remember. Just had randoms laying around that i made fit my 883 for a good 2 weeks till I got clipped on the freeway and totalled my back and bike haha. Clean products tho. They were still on my forks when I saw the bike .
will this fit my 15 iron 883?
Jonathon H on Aug 5, 2015
BEST ANSWER: Specs indicate the Iron's forks are 39mm. My Sporty's forks are also 39mm but I had to do some grinding on the Ness parts to make them fit the lower triple tree. Radius of the bracket is smaller than triple tree radius. Love the look and functionality of the bracket. Nothing else like it out there.
Will this fit on the bottom clamp as well? I am installing a batwing fairing that will cover up the top clamps as shown in the picture, so my turn signals need to be further down.
Austin K on Jul 24, 2015
BEST ANSWER: I mounted these on my wife's Sportster lowered 3" in the front with a memphis shades batwing and had plenty of room.
will the turn signal relocation kit work on a 2016 FXDLS ?
A C on Jun 16, 2016
BEST ANSWER: ? It fits on s 07 sportster
Would this fit my 2014 Dyna FXDB? If so, which fitment should I choose?
Lawrence M on Jun 4, 2015
BEST ANSWER: You should be good to go with the 49mm brackets. They are a great simple solution for what you want to do, just make sure you keep enough slack in you wiring to turn the bars to lock left & right.
I have an '09 FXD. I use an H-D quick release windshield. Will the relocation of the signals interfere with the windshield?
Will the windshield block the signals new placement?
Steel_Horse on Aug 23, 2015