Log In / Register
0 Checkout
AltRider Luggage Rack Triumph Tiger 800 2011-2016
  • AltRider Luggage Rack Triumph Tiger 800 2011-2016 - Black
  • AltRider Luggage Rack Triumph Tiger 800 2011-2016 - Black
  • AltRider Luggage Rack Triumph Tiger 800 2011-2016 - Black
  • AltRider Luggage Rack Triumph Tiger 800 2011-2016 - Black
  • AltRider Luggage Rack Triumph Tiger 800 2011-2016 - Black
  • AltRider Luggage Rack Triumph Tiger 800 2011-2016 - Silver
  • AltRider Luggage Rack Triumph Tiger 800 2011-2016 - Silver
  • AltRider Luggage Rack Triumph Tiger 800 2011-2016 - Silver

Please select a Finish to check availability, or to add this item to your Shopping Cart or Wish List.

Select Finish:


Select qty:

Please select a Finish to view availability.
Add to Wish List

Video Reviews (2)

AltRider Luggage Rack Triumph Tiger 800 2011-2016 Videos

AltRider Luggage Rack for Triumph Tiger 800

The AltRider Luggage Rack for the Triumph Tiger 800/XC is a must-have part, whether you ride on or off. Manufactured in the USA from 3/16 inch (4.75mm) thick anodized aluminum, it incorporates side flanges for extra strength and rigidity. The strategic cut-outs provide places to lash down your load with anything from straps to bungee cords to tie downs. AltRider ensured that every hole allows any hook to pass completely through the luggage rack for a secure attachment. All cut-outs feature a premium CNC routered edge to provide a smooth and a clean finish.

If you are interested in using a top case, the AltRider Luggage Rack interfaces with the Givi Monokey System, allowing attachment with a mount kit – no need for the additional cost of an adapter plate. The AltRider Givi Monokey Luggage Rack Topcase Mounting Kit is sold separately and allows Givi Monokey topcases to mount to the rack. The rack also provides an interface with the Rotopax Pack system, so you can easily bring extra gas, water, emergency supplies, or even tools.

Already have the Triumph OEM soft tail bag? No problem, the AltRider luggage rack provides cut-outs that make attachment easy, and scoot the placement further back so there’s room for a pillion.


  • Made of 3/16 inch (4.75 mm) thick anodized aluminum
  • Interfaces with the Givi Monokey top case system
  • Interfaces with the Rotopax Fuel system
  • Height: 3 inches
  • Width: 14 inches
  • Depth: 14 inches
  • Weight: 3 lbs

Note: Does not include Loctite or other thread locker.


Fitment Notes & Exceptions

  • The OEM Triumph plastic tail cover's bolt openings are very tight to the threaded bosses on the grab handle. This potentially makes installation difficult as well as making cross threading possible. AltRider suggests loosening the grab handles and OEM luggage rack to shift left or right if necessary, align the holes with the luggage rack, then tighten the metal piece and the luggage rack. 
This Product Fits:
Tiger 800 2011, 2012, 2013, 2014
Tiger 800 XC 20112016
Tiger 800 XCx 2015, 2016
Tiger 800 XR 2015, 2016
Tiger 800 XRx 2015, 2016
Product Style RevZilla Item # Manufacturer Product # Availability
Black 784879 T811-2-4000 In Stock: Ships within 24 hours
Silver 784878 T811-1-4000 In Stock: Ships within 24 hours


Orders $39.99 and over qualify for our fast free shipping offer. Click Here for FREE Shipping Terms and Conditions.

Please see our International Orders page for orders shipping outside the US.

We show real-time availability on this product page when you select the size/color item you want.  Most items will ship the same business day an order is placed,however if an item requires additional processing time a message will be shown indicating such.

See our full Shipping Policy for further details.


If your order arrives and it is not right, we will we'll fix it, NO NONSENSE, we promise.

Doesn't fit or just not happy with it? You can return any new, unused and unaltered item within 30 business days of delivery receipt of your item. We will issue a full refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Write a Product Review for a chance to win our monthly $100 giveaways.
AltRider Luggage Rack Triumph Tiger 800 2011-2016 4.6 5 25 25
Need a bigger Tail Rack, Get the Altrider.. I've owned many pieces from Altrider. IMO, better quality and better prices than Touratech. Also made in the good ol' USA! I like that all the cut-outs are smooth-edged so as not to cut into the bungies or whatever tie down method you use. It also has the holes pre-drilled for a Rotopax mount. Installation was a breeze. If I have do have one negative criticism its the weight. I get that you can't have it all, low price, low weight and durability. But this seems a bit on the heavy side. November 1, 2015
A few issues, but can be solved Ok, this is not a perfect product but it's darn close! So, I chose this over the other brand due to a few reasons: 1) I did not have to drill anything, instead, I would just remove the OEM plasticky cover and attach the rack directly to the bike 2) It looked more solid plus it had the "bent side wings" that would allow me to strap stuff even if I had the top case on A few things I noticed straight away: 1) this is one heavy piece of kit for an aluminum plate, but it's rock-solid 2) the finish and the laser cuts are seriously impressive 3) the flippin' instructions are WRONG! Let me explain that last bit: the instructions tell you to prepare tools A, B and C for an easy-breezy instalment. WRONG. The M bolts weren't the ones listed on the instructions (this happened with other AltRider kit too), but no biggie, but still WRONG. It does not tell you to install the adapter kit (if using one) prior to attaching the rack to the plate, although this is a no-brainer. But most importantly: it doesn't tell you that the bolts "might" not line up correctly to the mointing points (this is an exact fit accessory for christ's sake!) and that you might have to loosen up several other screws and bolts from your bike just to get it right. Ok, so maybe I'm a n0o.b or just a silly newbie with a big bike, and although I was never in a rut, it took me a bit to figure it out, thinking I had maybe purchased the wrong "exact fit" rack (was this the 2013 or the 2014? darn it!) So, after the panicky second or two, I figured out that if I removed the pilion seat I could loosen up both pilion handle bars (or whatever they are called) and re-tighten them after I got the rack in place. A bit tricky, but a secure fit. The other problem I encountered is that the spacers are too "spacey". I was hoping this would sit just a tad above where the plasticky OEM plate was. Not a chance, it's well over 2 inches above, leaving a few bits (bolts, wires, etc) explosed underneath. But it turned out to be a much appreciated space in order to re-tighten those other nuts and bolts you just loosened enough to get the rack in place. Design flaw or done on purpose? I reckon you couldn't attach the rack without the spacers or with some smaller ones. This is something you do not see in the product photos. Altogether, an impressive piece of kit and one that will sit on my bike for years on end. September 8, 2015
Quality rack but.... Only problem I had is the OEM city tail bag will not fit on it. I haven't tried my bigger OEM Adventure bag yet to see if it works. I like using the city bag well...around town for gloves etc. I don't really want the big bag on it all of the time. September 1, 2015
Very Solid Piece of Equipment This AltRider luggage rack looks and fits like it was OEM. It was a snap to install - it uses the same mounting holes as the existing rack. It feels very sturdy and has a nicely finished matte black finish. Lots of slots mean you can tie down just about anything to it. It looks good on the bike, too. Highly recommended. June 22, 2015
better then the GIVI have a adventure bike, I wanted bags to represent that. Givi makes great bags, but there mount for the bag looks, well bad. the AltRider rack is made of heavy aluminium plate, not plastic. it will take a beating. with the addition to the Givi mount kit, you can turn the tumor into something that looks as strong as your bike May 25, 2015
Lacking but not in quality The main reason I purchased was to strap a triumph Top soft bag to it on my tiger 800xc. The advertising specifically states that it works well with the triumph soft bag top case. Due to the positioning of the straps and plastic clips on the bottom of the bag it is just right to be wrong. I emailed the manufacturer for suggestions and they told me that they hadn't done any testing with that setup. Everything else about it is excellent just doesn't work well with the truimph soft bag top case. January 12, 2015
Excellent rack, looks cool This rack lined up on my 2014 800 XC very well, no drilling or extra hassle as some others experienced. Quick install, and it looks way cool. The spacers lift the rack up high enough that you can run straps under the rack for fitting bags etc. The fit and finish are very nice. No experience yet with durability since I just installed it, but it feels beefy even though it's very light. Highly recommended! June 22, 2014
Very Strong it took a while to show up (was on backorder), but I am Impressed with the strength of this thing. I went down offroad on a Tiger and half the weight of the bike end up with my top pelican case in the dirt, which I had bolted the the rack. Of course the case held up, and all that force went through the rack to the rear subframe. Rack took all the weight perfectly. June 9, 2014
2 3 4 next>>
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the AltRider Luggage Rack Triumph Tiger 800 2011-2016? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.