Log In / Register
Cart (0) Checkout
AltRider Crash Bars BMW F650GS
  • AltRider Crash Bars BMW F650GS - Black
  • AltRider Crash Bars BMW F650GS - Black
  • AltRider Crash Bars BMW F650GS - Black
  • AltRider Crash Bars BMW F650GS - Silver
  • AltRider Crash Bars BMW F650GS - Silver
  • AltRider Crash Bars BMW F650GS - Black
  • AltRider Crash Bars BMW F650GS - Black
  • AltRider Crash Bars BMW F650GS - Black
  • AltRider Crash Bars BMW F650GS - Black
  • AltRider Crash Bars BMW F650GS - Black
  • AltRider Crash Bars BMW F650GS - Black
  • AltRider Crash Bars BMW F650GS - Black
  • AltRider Crash Bars BMW F650GS - Black
  • AltRider Crash Bars BMW F650GS - Black

Please select a Color to check availability, or to add this item to your Shopping Cart or Wish List.

Select Color:

Select qty:
Your Price
Please select a Color to view availability.

Video Reviews (2)

AltRider Crash Bars BMW F650GS Videos

AltRider Crash Bars for BMW F650GS

Rough terrain can get the better of anyone, which is why AltRider designed the Crash Bars for the BMW F 650 GS Twin. Made from one inch stainless steel, it is sure to protect your engine in a fall.

These crash bars provide extensive coverage, guarding not only the engine itself but also the radiator and front plastics.

The bars are built with precision-manufactured mounts that fit directly into the existing motor mount, creating a robust connection that is secured with existing OEM fasteners on the top engine mounts. Torx fasteners are provided for the bottom mounts.

Unlike other crash bars, these do not use flanges or weak tabs and are not hung; they are actually mounted. Crafted with hand TIG welding, these black powder-coated stainless bars will hold up in spills and never show signs of rust.

Protect your clutch cover, radiator, and front fairings with the system that doesn’t deflect or bend.

  • Stainless T-304 construction
  • Hand TIG welding
  • 1 inch diameter tubing for strength
  • Comes with the Torx fasteners needed for the bottom mounts
  • Height: 13 inches
  • Width: 20 inches
  • Depth: 13 inches
  • Weight: 10 lbs


View Fitment Notes & Exceptions

Fitment Notes & Exceptions

Note: Your t50 socket must be able to fit inside a 0.7” ID tube 1” deep. All ½” drive sockets will be too big to fit, as will some 3/8” drive sockets. An L-handle T-50 key is the easiest solution.

Note: Compatible with BMW large enduro skid plate

Note: Not currently compatible with Remus header

This Product Fits:
F650GS 2008, 2009, 2010, 2011, 2012
F650GS ABS 2008, 2009, 2010, 2011, 2012
Write a Product Review for a chance to win our monthly $100 giveaways.
AltRider Crash Bars BMW F650GS 4.8 5 5 5
Excellent price, fit, looks great and easy to install I believe the AltRider crash bars were a great deal compared to other brands I searched. They fit great. The top portion is meant to fit into the frame so they are very sturdy. They were very easy to install and I think they look great in addition to protecting the bike. June 23, 2014
Great protective crash bars I have these on my 2011 F650GS and when we bought the same bike for my husband the first thing I did was call Revzilla to order a set for the new bike. The fit is excellent and, as always, Revzilla customer service is outstanding. April 22, 2013
Just installed with some difficulty I just installed these on my 2012 F650GS. Pros - Straightforward installation, with a very detailed installation manual and video available online I'm 6'3" and the bars are out of the way of my knees, the way they drop down from the top mount works well. My legs can touch them but they are not in the way, just feels like any other part of the bike. They look good installed, seems strong - though I have yet to drop the bike on them. I did lay the bike down gently in my garage on them, see picture. The weight was carried between the crash bars and the rear footpeg. Cons - I had difficulty with the alignment of the bars fitting up to my bike. It wasn't off a little bit, it was 1 or 2 inches off in a few places. I had to fight, pull, tug, and swear to get each bolt installed (even taking their advice at every step and not tightening any bolts until the end). I hope I never have to take these off again, or that the metal will adjust to the bike over time so they fit better. I was, eventually, able to get everything in place after one or two cross-threaded bolts and a nearly stripped allen head (that bolt won't be usable again). I would recommend two people for the installation. November 2, 2012
Great product. Fit perfectly. Looks awesome. Another great product from Altrider February 5, 2012
Great quality and easy to install Good looking (I got a sliver one and it looks great on my F650gs). It seems very rugged and well built...worth every penny I paid. Suggestion: It could be better if there is more protection on radiator. (wrapping around the corner of it) February 7, 2011
1-5 of 5
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the AltRider Crash Bars BMW F650GS? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

AltRider Crash Bars BMW F650GS
Already Asked: 2 Questions, 3 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
Judy D: It was on my Son's Wish List for Christmas! Dec 2, 2013
A shopper asked: Altrider's website seems to have two pages, one for the 650 and one for the 800. The pictures look the same to me and I don't see on revzilla's site that it mentions the 800. Jul 2, 2011
Answer this · Send to friends Good question? Yes (0) No (0)
Stevan P: They will fit the F800. Jul 14, 2011
Reply to Stevan Good answer? Yes (0) No (0)
JBRIII: One and the same. Jul 3, 2011
Reply to JBRIII Good answer? Yes (0) No (0)
Product Style RevZilla Item # Manufacturer Product # Availability
Black 722786 F609-2-1000 In Stock: Ships within 24 hours
Silver 722783 F609-0-1000 Available: Usually ships within 1-2 business days