Log In / Register
Cart (0) Checkout
We're sorry but this product is currently out of stock. You can be notified of its arrival by entering your email in the yellow box below.
Out of Stock
AdMore LED Kit For Givi E55 Topcase
Zoom
Select qty:
MSRP
$139.00
Your Savings (20%):
$27.80
Your Price
$111.20

AdMore Lighting High Output LED Kit For Givi E55 Topcase

This LED light kit has been custom designed to fit the Givi E55 top case and contains two high-intensity LED arrays that fit perfectly in the stock light cutouts without modification. Each LED array is equipped with 3mm high-powered bi-color (Red/Amber) LEDs. The mini controller embedded in the power harness allows you to connect the light kit to your stock tail/brake lights and turn signals. The case lights are always on when riding and brighten to high intensity when the brakes are applied. The right or left side of the case lights flash amber with your turn signals. As an added feature, the LED arrays are programmed to quickly modulate or flash several times when the brakes are applied to alert drivers that you are braking.

Includes:

  • (2) High intensity bi-color LED arrays
  • (1) Mini controller with turn signal functionality embedded in the power harness
  • Wiring with weatherproof quick-disconnect connectors
View Fitment Notes & Exceptions

Fitment Notes & Exceptions

  • This Admore LED Lighting Kit is not compatible with the R1200GS LC
Write a Product Review for a chance to win our monthly $100 giveaways.
AdMore LED Kit For Givi E55 Topcase 4.3 5 3 3
Lights up nice and bright. A little difficult to install but worth it in brightness and visibility. March 3, 2015
My 2nd set - replaced first set after I broke connector The Admore lighting for the Givi Maxia e55 trunk are the best out there. I love the flashing stop light, turn signals, 4 ways, and regular running lights. Makes the back of my Concours 14 more visible to drivers. My reason for buying the 2nd set of Admore lights, is I broke the first set's connector, coming out of the bottom of my box. I put my hole in the bottom of the trunk, and while it lines up nicely for the wire coming up from the bike, when I had the trunk off, and laid it on its side in the bed of my truck, the plastic connector broke. I would highly recommend that if you install this, don't put your hole on the bottom of the box (bottom referring to the side that is down when you have the box laid down, to open). I would recommend coming through the side, or the back of the box. Other than that, I love the product .... although it is pricey for what it is. I've posted a video of my bike, and shows the truck and Admore lighting. March 2, 2015
Admore lights I had my shop install the Admore lights on my Givi E55. Great functionality Im pretty sure I'm safer with the additional visibility at driver eye level November 27, 2014
1-3 of 3
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the AdMore LED Kit For Givi E55 Topcase? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

AdMore LED Kit For Givi E55 Topcase
Already Asked: 4 Questions, 11 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
Thomas A: Like, way cool pretty lights!! I bought this becauses I bought an E-55 top case. The Admore light kit is better than what Givi offers. You guys send me an e-mail that the kit was on sale. So I got it. Apr 17, 2015
Michael S: Because it has ALL the lighting options and brighter LEDs! Mar 22, 2015
Jeff A: Wanted more visibility for safety. Mar 13, 2015
esther p: Great lighting for significantly increased safety. Mar 11, 2015
Clifford C: I had this same kit in my Givi e55 trunk and liked the additional lighting, with both turn signals and brake lighting, as well as running lighting. I had damaged the connector coming out of my Givi trunk, and is the reason for purchasing another set. Be careful as the pin feeds are not overly well protected. Feb 7, 2015
A shopper asked: On a road trip, I would want to remove the case each night at the destination. How easy is it to disconnect and reconnect the power cable when I want to remove the case? May 6, 2015
Answer this · Send to friends Good question? Yes (0) No (0)
Clifford C: I have this kit in my Givi e55 Maxia trunk ... it connects and unconnects in just a couple of seconds. Just twist the connector where it comes out of the box and it detaches that quick. Also, very quick to plug in and twist the connector to lock it. Very easy to use product. I bought the bike specific wiring kit for my Kawasaki Concours 14 ... it was basically a plug and play to the bike's wiring harness in the tail. May 6, 2015
Reply to Clifford Good answer? Yes (0) No (0)
Thomas A: It takes 3 seconds to remove the cable and 6 seconds to connect it back on. Do not install your connector on the bottom of the box, if you do, you can't set the box down flat on the floor to open the lid. Try to place the connector so it's easy to see and reach. I placed mine about an inch up from the bottom, on the near the back right corner, in the curve of the box, on the back pad side. May 6, 2015
Reply to Thomas Good answer? Yes (0) No (0)
Michael S: I actually have not installed the lights yet but my plan was to use insulated butt connectors to install the case with to ensure easy removal. To ensure proper reinstall I was planning on colored heat shrink on the connections. I hope this helps with your decision. Sorry I could not answer with install already done. May 6, 2015
Reply to Michael Good answer? Yes (0) No (0)
esther p: It is a snap, if you installed it with the quick disconnect harness. The fitting should come through the lid of the case, near one of the hinges. Good luck. May 12, 2015
Reply to esther Good answer? Yes (0) No (0)
Robert W: Push da button and lift Smoked brisket white bread and co cola fer dinner May 6, 2015
Reply to Robert Good answer? Yes (0) No (0)
A shopper asked: What is the method of the wiring connection between the motorcycle and the top case. Is it similar to the connection pads on the standard Givi setup or is just a couple of loose wires coming out of the bike connectining to the box? Nov 8, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Robert W: I had my shop install. Let pros handle electrics Nov 27, 2014
Reply to Robert Good answer? Yes (0) No (2)
christopher g asked: Can you tie this AdMore product directly into the brake/turn light electrical system on a newer BMW that uses the CANbus system. I had hyperlites installed by the dealer secondary to the fact they told me that if you integrate it directly into the brake line it wreaks havoc with the electrical communication systems on the bike. Can you please advise if this is the same with the AdMore lights? If so looks like I'll have to get the dealer to install, but if not I'll just splice into the lines myself. Thanks for the help. Jan 17, 2015
Answer this · Send to friends Good question? Yes (0) No (0)
Product Style RevZilla Item # Manufacturer Product # Availability
AdMore LED Kit For Givi E55 Topcase 974845 LED55-T-TS Out of Stock